Gas cell system

1 meter boiled copper pipe diameter 8 mm
5 days of preparation excluding made to order items
€9.90
8 mm diameter boiled copper tube External Ø 8 mm and internal Ø 6 mm. Cold bendable on the curved part or with a special bending tool. Use the appropriate tube cutter for perfect alignment. Sold in 1 meter lengths (select quantity from drop down list).
10 CM cooked copper tube diameter 8 mm 10 CM cooked copper tube diameter 8 mm 2
5 days of preparation excluding made to order items
€1.90
400ML GAS LEAK DETECTOR SPRAY BOTTLE
5 days of preparation excluding made to order items
Gas cell system

400ML GAS LEAK DETECTOR SPRAY BOTTLE

RV225.03
€4.00
GAS DETECTOR 7450 MB srl SPRAY BOTTLE DETECTOR GAS AND / OR COMPRESSED AIR 400ML For all types of gas For joints and microfuges highlights the leaks from the pipes of any pressurized aeriform product (air - gas - oxygen - nitrogen etc.) non toxic - non corrosive - non flammable not dirty 400 ml pack
Anti-ice resistance for TRUMA regulators prepared Anti-ice resistance for TRUMA regulators prepared 2
5 days of preparation excluding made to order items
€63.00
Anti-ice resistance standard regulators not prepared Anti-ice resistance standard regulators not prepared 2
Out-of-Stock
€39.90
Universal anti-icing resistance standard regulators not prepared Prevents the regulator from freezing at low temperatures.
European gas nut locking wrench set
5 days of preparation excluding made to order items
Gas cell system

European gas nut locking wrench set

15 936344
€24.90
European gas nut locking wrench set DO NOT USE PARROT For those who travel a lot in Europe with the camper. It allows the assembly and disassembly of all European pipes. Sold in a hard case.
Gas closing solenoid valve for 8mm regulators Gas closing solenoid valve for 8mm regulators 2
5 days of preparation excluding made to order items
€194.00
Ø 8 mm gas closing solenoid valve for regulators Remote gas opening control for regulators and signaling LEDs. See the TRUMA user and installation manual Nominal voltage 12V Current consumption 40 mA temporary in opening 2A Tripping time> 0.1 s
Plastic gas cylinder holder Ø 33 Plastic gas cylinder holder Ø 33 2
5 days of preparation excluding made to order items
Gas cell system

Plastic gas cylinder holder Ø 33

80085
€3.50
Gas cylinder fixer Ø 33 in FAP plastic Diameter 33 cm. Strap 1.2 meters. For 11 kg cylinders. For your safety, make sure that the cylinders are always securely fastened before setting out on the road. Use two cylinder straps for correct anchoring to the wall using screws suitable for the wall.
Raw copper tube diameter 8 mm x 1 meter
5 days of preparation excluding made to order items
Gas cell system

Raw copper tube diameter 8 mm x 1 meter

921193-1
€9.70
Raw copper tube diameter 8 mm by 1 meter External Ø 8 mm and internal Ø 6 mm. For linear connections of the cell system. Use the appropriate tube cutter for perfect alignment. It must be heated if you wish to make creases. Sold only in 1.00 meter lengths.
TRUMA DUO-COMFORT CONTROL + ANTI-ICE RESISTANCE - BLACK TRUMA DUO-COMFORT CONTROL + ANTI-ICE RESISTANCE - BLACK 2
5 days of preparation excluding made to order items
€195.00
TRUMA DUO-COMFORT CONTROL + ANTI-ICE RESISTANCE - BLACK for CS regulators up to 2018 Internal control for Truma Duo Comfort Selector with anti-icing resistance to face winter holidays with serenity and control of usage cylinder. Comfortable and safe. With the remote switch, the gas system in the gas cylinder compartment can be deactivated from the...
TRUMA GAS CLOSURE SOLENOID VALVE FOR REGULATORS 10MM TRUMA GAS CLOSURE SOLENOID VALVE FOR REGULATORS 10MM 2
5 days of preparation excluding made to order items
€195.00
TRUMA GAS CLOSURE SOLENOID VALVE REGULATORS 10MM Remote gas opening control for regulators and signaling LEDs. Rated voltage 12V Current consumption 40 mA temporary opening 2A Trip time > 0.1 s
WALL MOUNTING FOR GAS CYLINDER
5 days of preparation excluding made to order items
Gas cell system

WALL MOUNTING FOR GAS CYLINDER

026 FPB-H
€17.90
FISSAGGIO A PARETE PER BOMBOLA GAS
Wall support for gas cylinder Ø300 with CAMPKO tensioners Wall support for gas cylinder Ø300 with CAMPKO tensioners 2
5 days of preparation excluding made to order items
€99.00
Wall support for fixing a Ø 300 gas cylinder in the camper + 2 stainless steel straps with pin tensioner The fixing plate and tension straps are made of high quality stainless steel . The tension belts are also rubberized. The opening and closing of the tensioners takes place via two hexagon socket screws (key included), so that the gas cylinder can...
Showing 1-13 of 13 item(s)
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text