Gas fittings C

10MM DUOC HOSE CONNECTION KIT FOR CS
5 days of preparation excluding made to order items
Threaded gas fittings

10MM DUOC HOSE CONNECTION KIT FOR CS

015 5002.611
€34.20
10MM DUOC HOSE CONNECTION KIT FOR CS DUOC supplementary kit to be used with DUOCONTROL CS with a distance between the cylinders greater than 100 cm or for remote mounting of a gas filter for gas pipe with a diameter of 10 mm.
14x26x1.5 mm diameter Set of 5 rubber gaskets 14x26x1.5 mm diameter Set of 5 rubber gaskets 2
5 days of preparation excluding made to order items
Threaded gas fittings

14x26x1.5 mm diameter Set of 5 rubber gaskets

EC70700011
€1.90
Diameter 14x26x1.5 mm thickness - Set of 5 rubber gaskets for tap as shown in the attached image which transforms the Campingaz attack into an Italia attack. See below in related products
2-way gas connection with shut-off cocks
Out-of-Stock
€14.90
Connection with shut-off cocks: - 2 PG hose connector outputs dia. 10 mm - female inlet W20x1 / 14 "LH
3-way 120° gas hose fitting PH10 UNI TUBE
5 days of preparation excluding made to order items
Gas hose fittings

3-way 120° gas hose fitting PH10 UNI TUBE

RO078.00
€3.90
Brass hose connection for 8 mm diameter gas pipe equipped with 3-way Ph10 UNI. To connect 2 users to a single power source with equal pressure.
3-way gas fitting with central nut W20 x 1/14 SX ITALIA 3-way gas fitting with central nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
€9.90
3-way gas fitting with central nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left-hand W 20 x 1/14” thread into two male outlets Entry Ch25 h16 (W20x1/14" Left) 2x W20x1/14" Left outlet
3-way gas fitting with side nut W20 x 1/14 SX ITALIA 3-way gas fitting with side nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
€9.90
3-way gas fitting with side nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left W 20 x 1/14” thread of the gas cylinder into two male outlets. Connection entry ch25h16 (W20x1/14"Sx female) Fitting outlet 2 x W20x1/14"Sx Male Height approximately 100 mm.
3-way male brass T fitting W20x1/14 ITALY 3-way male brass T fitting W20x1/14 ITALY 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way male brass T fitting W20x1/14 ITALY

R3VMT
€8.50
3-way male brass fitting W20x1/14" - SX to T - ITALY. To connect a left ITALIA W20x1/814" cylinder with HIGH PRESSURE hose and start again with two identical HIGH PRESSURE hoses connected to two different users.
3-way T-shaped gas hose fitting for LPG Ph10 UNI hose
5 days of preparation excluding made to order items
€3.90
Brass T hose fitting for 8 mm diameter gas pipe Ph10 UNI - equipped with 3 ways. To connect 2 users to a single power source with equal pressure.
3-way Y-shaped gas hose fitting, Ph10 UNI tube
5 days of preparation excluding made to order items
€3.50
Brass hose connection for gas pipe diam. 8 mm equipped with 3 ways. To connect 2 users to a single power source with equal pressure.
90 degree connection for TRUMA and GOK regulators... 90 degree connection for TRUMA and GOK regulators... 2
5 days of preparation excluding made to order items
€11.90
90 degree connection for TRUMA and GOK regulators EN12864/D - M20x1.5-F20x1.5 To transform the straight outlet of a GOK regulator or TRUMA exchanger or flexible hose or gas filter, with a 90° outlet. To be used in cases where space is not sufficient. Female DX thread for regulator or other on one side and male DX on the other side. Total length approx. 53...
90 Degree Outlet Fitting Kit Camping Bottle Italy
  • Pack
5 days of preparation excluding made to order items
Threaded gas fittings

90 Degree Outlet Fitting Kit Camping Bottle Italy

15539+15806
€19.90
90 Degree Outlet Fitting Kit Camping Bottle Italy Useful for exiting at 90 degrees from the camping-type gas cylinder with vertical connection, when there is little height space such as in vans, campers in general. It also allows you to use a Campingaz type cylinder with only tap A if necessary. Kit consisting of: A= number 1 HORIZONTAL tap for camping...
90 ° fitting for German regulators
5 days of preparation excluding made to order items
Threaded gas fittings

90 ° fitting for German regulators

015 RRD
€27.90
90 ° fitting for German regulators
90 ° galvanized gas fitting for copper pipe Ø 10 mm
5 days of preparation excluding made to order items
€6.60
90 ° gas fitting for copper pipe Ø 10 mm
90 ° gas acc galvanized 8mm x 8mm pipe
5 days of preparation excluding made to order items
Fittings for metall

90 ° gas acc galvanized 8mm x 8mm pipe

015 W8Z8
€9.00
Raccordo 90° gas zincato 8mm x tubo 8mm
90 ° gas fitting for Ø 8 mm tube
5 days of preparation excluding made to order items
Fittings for metall

90 ° gas fitting for Ø 8 mm tube

RGS11B
€4.60
90 ° gas fitting for Ø 8 mm tube
90 ° steel gas fitting for copper pipe Ø 8 mm
5 days of preparation excluding made to order items
€4.90
90 ° galvanized steel gas fitting for copper pipe Ø 8 mm
Adapter F Italia - F Campingaz - brass thread Adapter F Italia - F Campingaz - brass thread 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adapter F Italia - F Campingaz - brass thread

RO073.02
€6.90
Adapter Female Italy (20 x 1-1/14 inch LH) - Female Campingaz - threaded, brass
Adapter M Italy - F gas regulator - threaded brass Adapter M Italy - F gas regulator - threaded brass 2
5 days of preparation excluding made to order items
€5.90
Male adapter Italy (20 x 1-1/14 inch SX) - Female for gas regulator (20 x 1.5 DX) - threaded, brass
Adattatore M Italia - M Campingaz ottone per gas Adattatore M Italia - M Campingaz ottone per gas 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adattatore M Italia - M Campingaz ottone per gas

RO074.06
€8.90
Adapter M Italia - M Campingaz threaded brass for gas (without gasket) Male W20x1/14“ Left to/to Male 16 x 1,5 (campingaz). See picture of the fitting mounted on a blue cylinder, which transforms the Campingaz connection into a male ITALIA like a normal Italian cylinder. It is used to fill Campingaz cylinders in Italy or to adapt them to your Italian...
Bicone fitting P 91 Ø 10 mm to M20x1.5 Bicone fitting P 91 Ø 10 mm to M20x1.5 2
5 days of preparation excluding made to order items
Threaded gas fittings

Bicone fitting P 91 Ø 10 mm to M20x1.5

924771
€8.50
Bicone fitting P 91 Diameter 10 mm to 20x1.5 To connect rigid pipes of Ø 8 to 10 on a 20 x 1.5 thread from gas regulators
Bicone fitting P 91 Ø 8 mm to 20x1.5 Bicone fitting P 91 Ø 8 mm to 20x1.5 2
5 days of preparation excluding made to order items
Threaded gas fittings

Bicone fitting P 91 Ø 8 mm to 20x1.5

910394
€5.90
Bicone fitting P 91 Diameter 8 mm to 20x1.5 To connect Ø 8 rigid pipes to 20 x 1.5 threads For gas regulators
BLIND NUT ITALIAN THREAD W20X1 1/14 left " BLIND NUT ITALIAN THREAD W20X1 1/14 left " 2
5 days of preparation excluding made to order items
Threaded gas fittings

BLIND NUT ITALIAN THREAD W20X1 1/14 left "

DCSX
€2.90
BLIND NUT ITALIAN THREAD W20X1 1/14 "LEFT Galvanized For closing the male thread of the Italian cylinder and the like. To be used with gasket not included in the supply.
Blind plug M20x1.5 for LPG regulator Blind plug M20x1.5 for LPG regulator 2
5 days of preparation excluding made to order items
Vehicle gas regulators

Blind plug M20x1.5 for LPG regulator

112467
€9.90
Blind plug M20x1.5 for LPG regulator
Brass biconical ogive for gas pipe fittings Ø 10
5 days of preparation excluding made to order items
€0.60
Brass biconical ogive for gas pipe fittings Ø 10
Showing 1-24 of 99 item(s)
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text