FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE
FAP - ADAPTER FOR FAP 3 INCH VALVE

FAP - ADAPTER FOR FAP 3 INCH VALVE

5 days of preparation excluding made to order items
€11.20
VAT included
11.2
5 days of preparation excluding made to order items

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
65072
1 Item
No reviews

16 other products in the same category:

FAP - Handle for 3 inch valves FAP - Handle for 3 inch valves 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Handle for 3 inch valves

65122
€9.50
FAP handle for 3 inch valves. The handle has a threaded nut and a snap ring that fits into the existing groove on the valve stem. Can be used as a replacement for the 3 inch valve with 60 cm stem article 7308.
FAP - Complete female 3 inch exhaust valve 9017CM04CT FAP - Complete female 3 inch exhaust valve 9017CM04CT 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Complete female 3 inch exhaust valve 9017CM04CT

65054
€26.90
FAP 3 inch hermetically sealed drain valve, female flange thread, complete with bayonet plug and gasket - FAP 9017CM04CT. One side with internal thread flange Opposite side with bayonet flange and sealing cap. Handle printed on the rod, not replaceable.
FAP - Female flange 3'' internal thread FAP - Female flange 3'' internal thread 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Female flange 3'' internal thread

65061
€3.90
Female flange 3 inch FAP internal thread
1.5 and 3 inch FAP exhaust valve rod joint kit 1.5 and 3 inch FAP exhaust valve rod joint kit 2
5 days of preparation excluding made to order items
3 scar FAP valves

1.5 and 3 inch FAP exhaust valve rod joint kit

VAL300R
€3.90
Replacement joint kit for 1.5 and 3 inch FAP exhaust valve rod Consisting of 1 + 1 + 2 interlocking components. The continuous use of the joint for dismantling the rod with handle makes it necessary to replace it after some time of use, Keep your exhaust valve in tip-top condition with a spare gasket that can be replaced when needed. Quick and easy...
FAP - Threaded valve fitting for ø 75 pipe FAP - Threaded valve fitting for ø 75 pipe 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Threaded valve fitting for ø 75 pipe

VAL318
€4.88
Female threaded FAP valve fitting for ø 75 pipe
3 '' curved bayonet fitting 3 '' curved bayonet fitting 2
5 days of preparation excluding made to order items
3 scar FAP valves

3 '' curved bayonet fitting

65065
€9.90
Attacco a baionetta curvo 3'
FAP - Sleeve 3' inch FAP - Sleeve 3' inch 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Sleeve 3' inch

VAL307
€7.90
Threaded sleeve for 3 inch FAP valve
FAP - 3 inch straight bayonet fitting FAP - 3 inch straight bayonet fitting 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3 inch straight bayonet fitting

65066
€7.90
FAP 3 inch straight bayonet mount
Flange for 3 '' cap Flange for 3 '' cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

Flange for 3 '' cap

VAL306
€4.40
Flangia per tappo 3'
Gasket for 3 'cap Gasket for 3 'cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

Gasket for 3 'cap

VAL305G
€1.40
Guarnizione per tappo 3
FAP - 3-inch VALVE BODY - Central body only without... FAP - 3-inch VALVE BODY - Central body only without... 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3-inch VALVE BODY - Central body only without gaskets and flange 017CO

65070
€23.00
FAP - 3-inch VALVE BODY - Center body only without gaskets and flange 017CO Handle molded on the rod, not replaceable.
FAP - 3'' male flange external thread FAP - 3'' male flange external thread 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3'' male flange external thread

VAL304
€4.40
Male flange for 3" FAP valve with external thread
FAP Gasket 3 inch flange for exhaust valves FAP Gasket 3 inch flange for exhaust valves 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP Gasket 3 inch flange for exhaust valves

VAL310
€1.90
FAP Flange gasket for 3 inch exhaust valves
FAP - 3 inch valve cap FAP - 3 inch valve cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3 inch valve cap

VAL305
€6.20
Bayonet cap for 3 inch DPF valve Complete with gasket
DPF - 3'' flat flange DPF - 3'' flat flange 2
5 days of preparation excluding made to order items
3 scar FAP valves

DPF - 3'' flat flange

VAL315
€4.50
Flat flange for 3" DPF valve
FAP - Complete male 3'' drain valve FAP - Complete male 3'' drain valve 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Complete male 3'' drain valve

VAL300M
€26.00
3" FAP valve with inlet side connection flange with male thread and bayonet closure cap on the outlet side - 9017CM03CT Handle printed on the rod, not replaceable.

Customers who bought this product also bought:

Seal Kit for Aqua Magic Bravura 31112 Seal Kit for Aqua Magic Bravura 31112 2
5 days of preparation excluding made to order items
RIC AQUAMAGIC BRAVURA

Seal Kit for Aqua Magic Bravura 31112

65260
€30.90
Seal Kit for Aqua Magic Bravura 31112 Kit consisting of 4 gaskets, for Thetford Bravura toilets, in point 8 of the drawing.
FAP - Complete female 3 inch exhaust valve 9017CM04CT FAP - Complete female 3 inch exhaust valve 9017CM04CT 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Complete female 3 inch exhaust valve 9017CM04CT

65054
€26.90
FAP 3 inch hermetically sealed drain valve, female flange thread, complete with bayonet plug and gasket - FAP 9017CM04CT. One side with internal thread flange Opposite side with bayonet flange and sealing cap. Handle printed on the rod, not replaceable.
FAP - Female flange 3'' internal thread FAP - Female flange 3'' internal thread 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Female flange 3'' internal thread

65061
€3.90
Female flange 3 inch FAP internal thread
FAP - Complete male 3'' drain valve FAP - Complete male 3'' drain valve 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Complete male 3'' drain valve

VAL300M
€26.00
3" FAP valve with inlet side connection flange with male thread and bayonet closure cap on the outlet side - 9017CM03CT Handle printed on the rod, not replaceable.
FAP - Handle for 3 inch valves FAP - Handle for 3 inch valves 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Handle for 3 inch valves

65122
€9.50
FAP handle for 3 inch valves. The handle has a threaded nut and a snap ring that fits into the existing groove on the valve stem. Can be used as a replacement for the 3 inch valve with 60 cm stem article 7308.
Flange for 3 '' cap Flange for 3 '' cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

Flange for 3 '' cap

VAL306
€4.40
Flangia per tappo 3'
FAP - 3-inch VALVE BODY - Central body only without... FAP - 3-inch VALVE BODY - Central body only without... 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3-inch VALVE BODY - Central body only without gaskets and flange 017CO

65070
€23.00
FAP - 3-inch VALVE BODY - Center body only without gaskets and flange 017CO Handle molded on the rod, not replaceable.
Adapter harness for NE146 and NE186 to NE287 chargers Adapter harness for NE146 and NE186 to NE287 chargers 2
5 days of preparation excluding made to order items
Battery charger

Adapter harness for NE146 and NE186 to NE287 chargers

000.402.92
€10.90
Cablaggio adattatore per caricabatterie da  NE146 e NE186 a NE287 Indispensabile per l'installazione del nuovo modello NE287 in sostituzione del vecchio modello NE 146 e NE186.
FAP - Threaded valve fitting for ø 75 pipe FAP - Threaded valve fitting for ø 75 pipe 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Threaded valve fitting for ø 75 pipe

VAL318
€4.88
Female threaded FAP valve fitting for ø 75 pipe
NTC probe for Nordelettronica battery 84.0060.018 ex... NTC probe for Nordelettronica battery 84.0060.018 ex... 2
5 days of preparation excluding made to order items
Battery charger

NTC probe for Nordelettronica battery 84.0060.018 ex 000.402.93

84.0060.018
€15.00
NTC probe for Nordelettronica battery 84.0060.018 ex 000.402.93 - MINIFIT F-M8 Suitable for all Nordelettronica battery chargers.
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text