Trio-gas Multicontrol built-in 2 MCR probes
Trio-gas Multicontrol built-in 2 MCR probes
Package consisting of control unit, two probes, 5 and 2.5 m pre-wired quick-connect cables.
TRIO-GAS is an electronic device designed for use in 12V recreational vehicles.
| Acoustic power | 90db |
| Diet | 10-16V DC |
| Absorption | <50mA |
| Operating Temp. | from -10°C to + 50°C |
| Exit | Open collector type max 1.5 A |
| Wrapper | Self-extinguishing ABS |
| Dimensions | 90x80x10 mm |
| Probe dimensions | 54x30x12 mm |
| Cables supplied | quick-fit (5m and 2.5m) |
Dimensions of the flange to be screwed to the wall approximately 80 x 72 h mm.
Minimum recess hole dimensions approx. 82 x 74 h mm
It detects the presence of “LPG – CARBON MONOXIDE – SOPORIFYING GASES (ether and derivatives)” in an anomalous concentration lower than the danger threshold (LIE) by signalling with a visual (LED) and acoustic (BUZZER) alarm.
The TRIO-GAS is equipped with an “open-collector” output that is activated in the event of an alarm, to which it is possible to connect a manually reset gas solenoid valve or activate other electrical devices (aerators, sirens, etc.) or connect to any type of burglar alarm.
The device has 3 LEDs, a test button and an acoustic signal.
- GREEN LED: power on, activated via the sliding lever located on the side (front on multicontrol models) of the device.
- RED LED: GAS presence alarm
- YELLOW LED: circuit fault / anomaly
- TEST: Test the functionality of the signaling circuit
TRIO-GAS MULT ICONTROL has been designed and manufactured with a probe external to the control unit to facilitate its positioning anywhere in the camper at the user's discretion. Each control unit is designed for the connection of 1 to 3 probes using pre-wired cables supplied.
custom html
To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option