1 INCH BALL VALVE WITH G1 BULKHEAD AND CURVED HOSE CONNECTOR DN30
1 INCH BALL VALVE WITH G1 BULKHEAD AND CURVED HOSE CONNECTOR DN30
1 INCH BALL VALVE WITH G1 BULKHEAD AND CURVED...
1 INCH BALL VALVE WITH G1 BULKHEAD AND CURVED...

1 INCH BALL VALVE WITH G1 BULKHEAD AND CURVED HOSE CONNECTOR DN30

5 days of preparation excluding made to order items
€17.90
VAT included
17.9
5 days of preparation excluding made to order items

1 INCH BALL VALVE WITH G1 BULKHEAD AND CURVED HOSE CONNECTOR DN30

White polypropylene ball valve with one GAS female G threaded bulkhead end with EPDM flat seal and dark grey polypropylene clamping collar, one threaded end with metric male profile M equipped with 90° curved hose connector for white polyamide 66 DN pipe and food-grade NBR O-Ring

  • Connection standard: Hose barb for DN30 and G1 hose
  • Connection: Bulkhead
  • Operating pressure: 10 bar at 20°C
  • Maximum operating temperature: 80°C
  • Full Passage: The ball bore corresponds to the inner diameter of the pipe
  • Materials: NBR E Glass fiber reinforced polypropylene
  • Colours: White (RAL 9003) and Red (RAL 3031)

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
60075
3 Items
No reviews

16 other products in the same category:

Stopwater water saver Stopwater water saver 2
5 days of preparation excluding made to order items
Valves Caps Taps

Stopwater water saver

STP085
€14.90
Stopwater water saver. Stopwater allows you to let water flow from the tap without turning any knob but simply by pushing the white rod. It allows you to reduce consumption by up to 85%. Two positions, water saving and always open flow. Can be installed in place of the tap filter, on both male and female threads, thanks to the adapter supplied.
1-way tap Ø 13mm F 1/2 '' c / ghr and g.
5 days of preparation excluding made to order items
Valves Caps Taps

1-way tap Ø 13mm F 1/2 '' c / ghr and g.

VAL003
€2.70
Rubinetto 1via Ø 13mm F 1/2' c/ghr e g.
3/4 '' check valve
5 days of preparation excluding made to order items
Valves Caps Taps

3/4 '' check valve

VAL020R
€9.80
Valvola di ritegno 3/4'
Lever opening tap for emptying camper tank 3/4" - 20 mm... Lever opening tap for emptying camper tank 3/4" - 20 mm... 2
Out-of-Stock
Valves Caps Taps

Lever opening tap for emptying camper tank 3/4" - 20 mm hose connector

16499
€12.90
Lever opening tap for emptying camper tank 3/4" - 20 mm hose connector White polypropylene ball valve with one female G GAS threaded end, one male M metric profile threaded end equipped with 90° curved hose connector for white polyamide 66 DN pipe and food-grade NBR O-Ring PLASTIC VALVE WITH 1/4 TURN LEVER OPENING. 3/4" inlet to be screwed onto the...
View
Acquastop saver Acquastop saver 2
5 days of preparation excluding made to order items
Showers

Acquastop saver

VAL011
€22.80
Raccordo risparmiatore d'acqua Acquastop. Basta collegarlo al tubo flessibile per poter comandare la chiusura del miscelatore direttamente dlla doccetta. Attacco ½ F- ½ M.
Mini valve f / f 3/8 ''
5 days of preparation excluding made to order items
Valves Caps Taps

Mini valve f / f 3/8 ''

VAL010M
€5.90
Mini valve f / f 3/8 '
1/2 '' check valve
5 days of preparation excluding made to order items
Valves Caps Taps

1/2 '' check valve

VAL015R
€6.20
Valvola di ritegno 1/2'
2-way PG tap Ø 10 mm
5 days of preparation excluding made to order items
Valves Caps Taps

2-way PG tap Ø 10 mm

VAL009
€1.80
Rubinetto a 2 vie Ø 10 mm
3/4 '' reduced bore f / f valve
5 days of preparation excluding made to order items
Valves Caps Taps

3/4 '' reduced bore f / f valve

VAL020P
€9.60
Valvola f/f a passaggio ridotto 3/4'
Hand wash basin Ø 18mm filet. 3/4 ''
5 days of preparation excluding made to order items
Valves Caps Taps

Hand wash basin Ø 18mm filet. 3/4 ''

VAL002
€4.40
Rub.lavamani Ø 18mm filet. 3/4'
1-way tap Ø13mm F3 / 4 '' c / ghr and sheath
5 days of preparation excluding made to order items
Valves Caps Taps

1-way tap Ø13mm F3 / 4 '' c / ghr and sheath

VAL005
€2.50
Rubinetto 1 via Ø13mm F3/4' c/ghr e gua
Valvola scarico uscita 20 mm foro PG11 Valvola scarico uscita 20 mm foro PG11 2
5 days of preparation excluding made to order items
Exhaust pipe fittings

Valvola scarico uscita 20 mm foro PG11

250320
€15.90
Dump valve with right outlet, 20mm mounting hole, 11mm tubing Sandwich mounting on the water tank side, for draining.
2-way PG tap Ø 13 mm
5 days of preparation excluding made to order items
Valves Caps Taps

2-way PG tap Ø 13 mm

VAL010
€1.80
Rubinetto a 2 vie Ø 13 mm
Lever opening tap for emptying the camper tank 1/2" - 20... Lever opening tap for emptying the camper tank 1/2" - 20... 2
5 days of preparation excluding made to order items
Valves Caps Taps

Lever opening tap for emptying the camper tank 1/2" - 20 mm hose connection

16498
€13.50
Lever-operated tap for emptying camper tanks, 1/2" - 20 mm hose connection PLASTIC VALVE WITH 1/4 TURN LEVER OPENING. 1/2" inlet to screw onto the tank with nut and gasket. 20mm elbow outlet hose connector. Allows for quick draining of the tank. Maximum size 150 mm x 100 mm.
1/2 '' f / f mini valve
5 days of preparation excluding made to order items
Valves Caps Taps

1/2 '' f / f mini valve

VAL015M
€6.90
Mini valve f / f 1/2 '
3-way 3/8 T "valve
5 days of preparation excluding made to order items
Valves Caps Taps

3-way 3/8 T "valve

VAL281T
€23.90
Valvola 3 vie 3/8" a T

Customers who bought this product also bought:

Cabin carpets in carpet Cabin carpets in carpet 2
5 days of preparation excluding made to order items
Carpet and Rugs

Cabin carpets in carpet

MQ101C/C
€29.00
Contoured cockpit mat, specific to the selected model. From the drop-down list choose the model to get the price and availability. The image is purely indicative; the shape varies from vehicle to vehicle. Rubber door sill mat. MQC/C : ECONOMIC RIBBED classic carpet. Black color.
7-layer internal CAMPER thermal blackout kit 7-layer internal CAMPER thermal blackout kit 2
5 days of preparation excluding made to order items
Internal thermal blinds

7-layer internal CAMPER thermal blackout kit

TR101
€55.00
Thermal blackout kit for CAMPER interiors with 7 layers The kit consists of 3 pieces (front glass plus the two side ones); It is applied to the glass using the PVC suction cups supplied together with a convenient storage bag. The 7-layer internal blind is the best-selling and cheapest item on the market. Thanks to the composition of the 7 quilted layers...
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text