Gas regulator TRUMA MONOCONTROL CS 30mbar with crash sensor 8/10 after 2019 - 52412-01
Gas pressure regulator TRUMA MONOCONTROL CS 30mbar with crash sensor 8/10 after 2019 for single cylinder systems - 52412 - 01
- Easily visible crash sensor trigger and easy reset
- Reduced weight
- Quick assembly
SPECIFICATIONS
- Gas type Liquid gas (propane / butane)
- Inlet pressure 0.3 – 16 bar
- Outlet pressure 30 mbar
- Flow rate 1.5 kg/h
- Regulator input male fitting M20 x 1.5 (G.13) Regulator output 8 or 10 mm ogive fitting (H.9)
- Recommended tightening torque
- 3 – 5 Nm for the M20 x 1.5 (G.13) union nut
- 14 – 19 Nm for the 8 mm olive fitting
- 16 – 21 Nm for the 10 mm olive fitting
- Horizontal release value 4.0 g ± 1.0 g
- Operating temperature -20 °C to +50 °C
Further details on the Truma MonoControl CS gas pressure regulator
The new generation Truma MonoControl CS is a gas pressure regulator with crash sensor for single-cylinder systems. The sensor allows you to heat your camper or caravan safely even while driving: in the event of an accident with an impact speed of 15-20 km/h against a fixed obstacle, the crash sensor immediately stops the gas flow, preventing gas from escaping from the potentially damaged system. The MonoControl CS gas pressure regulator is also perfect for use when camping with the vehicle stationary.
Once triggered, the crash sensor can be easily reset by pressing the yellow reset button on the Truma MonoControl CS gas pressure regulator, which is then ready for operation again. With a flow rate of 1.5 kg/h, the regulator is designed for maximum consumption: neither the consumers nor the flow rate of the gas system need to be calculated.
Truma gas pressure regulators meet the highest standards, but can still be damaged by aerosols from contaminated gas cylinders. Truma therefore recommends always using the Truma gas filter.
custom html
To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option