Valves and fittings

1.5 and 3 inch FAP exhaust valve rod joint kit 1.5 and 3 inch FAP exhaust valve rod joint kit 2
5 days of preparation excluding made to order items
3 scar FAP valves

1.5 and 3 inch FAP exhaust valve rod joint kit

VAL300R
€3.90
Replacement joint kit for 1.5 and 3 inch FAP exhaust valve rod Consisting of 1 + 1 + 2 interlocking components. The continuous use of the joint for dismantling the rod with handle makes it necessary to replace it after some time of use, Keep your exhaust valve in tip-top condition with a spare gasket that can be replaced when needed. Quick and easy...
112mm rod with handle for 1.5 inch FAP exhaust valves 112mm rod with handle for 1.5 inch FAP exhaust valves 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

112mm rod with handle for 1.5 inch FAP exhaust valves

VAL157
€18.00
112mm rod with handle for 1.5 inch FAP exhaust valves
3 '' curved bayonet fitting 3 '' curved bayonet fitting 2
5 days of preparation excluding made to order items
3 scar FAP valves

3 '' curved bayonet fitting

65065
€9.90
Attacco a baionetta curvo 3'
DPF - 3'' flat flange DPF - 3'' flat flange 2
5 days of preparation excluding made to order items
3 scar FAP valves

DPF - 3'' flat flange

VAL315
€4.50
Flat flange for 3" DPF valve
FAP - 1 and 1/2 inch drain valve - 68 cm - 9039M600N150PT FAP - 1 and 1/2 inch drain valve - 68 cm - 9039M600N150PT 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - 1 and 1/2 inch drain valve - 68 cm - 9039M600N150PT

023 VSP-68-FP-T
€51.00
FAP - 1 and 1/2 inch drain valve - 68 cm - 9039M600N150PT On one side, exhaust nozzle On the other side flat flange.
FAP - 1-1/2" gray water valves complete 90390052 FAP - 1-1/2" gray water valves complete 90390052 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - 1-1/2" gray water valves complete 90390052

65056
€33.50
FAP 90390052 gray water drain valves 1.5" in black ABS 90390052. Exhaust side with bayonet connection and closing cap and gasket. Opposite side smooth, unthreaded.
FAP - 1.5 inch male flange not threaded FAP - 1.5 inch male flange not threaded 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - 1.5 inch male flange not threaded

65128
€4.60
FAP male flange 1.5 inch external, not internally threaded (smooth), for hermetically sealed valves
FAP - 3 inch straight bayonet fitting FAP - 3 inch straight bayonet fitting 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3 inch straight bayonet fitting

65066
€7.90
FAP 3 inch straight bayonet mount
FAP - 3 inch valve cap FAP - 3 inch valve cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3 inch valve cap

VAL305
€6.20
Bayonet cap for 3 inch DPF valve Complete with gasket
FAP - 3'' male flange external thread FAP - 3'' male flange external thread 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3'' male flange external thread

VAL304
€4.40
Male flange for 3" FAP valve with external thread
FAP - 3'' valve with 60 cm rod - 017M460N230PT FAP - 3'' valve with 60 cm rod - 017M460N230PT 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3'' valve with 60 cm rod - 017M460N230PT

VAL300A
€37.00
3" FAP valve with 60 cm rod - 017M460N230PT Exhaust side with bayonet cap, opposite side smooth for fixing to the tank. Removable pole with quick-release joint Removable and replaceable handle.
FAP - 3-inch VALVE BODY - Central body only without... FAP - 3-inch VALVE BODY - Central body only without... 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - 3-inch VALVE BODY - Central body only without gaskets and flange 017CO

65070
€23.00
FAP - 3-inch VALVE BODY - Center body only without gaskets and flange 017CO Handle molded on the rod, not replaceable.
FAP - ADAPTER FOR FAP 3 INCH VALVE FAP - ADAPTER FOR FAP 3 INCH VALVE 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - ADAPTER FOR FAP 3 INCH VALVE

65072
€11.20
FAP - Complete female 3 inch exhaust valve 9017CM04CT FAP - Complete female 3 inch exhaust valve 9017CM04CT 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Complete female 3 inch exhaust valve 9017CM04CT

65054
€26.90
FAP 3 inch hermetically sealed drain valve, female flange thread, complete with bayonet plug and gasket - FAP 9017CM04CT. One side with internal thread flange Opposite side with bayonet flange and sealing cap. Handle printed on the rod, not replaceable.
FAP - Complete male 3'' drain valve FAP - Complete male 3'' drain valve 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Complete male 3'' drain valve

VAL300M
€26.00
3" FAP valve with inlet side connection flange with male thread and bayonet closure cap on the outlet side - 9017CM03CT Handle printed on the rod, not replaceable.
FAP - Drain valve 1''1/2 rod 115 cm FAP - Drain valve 1''1/2 rod 115 cm 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Drain valve 1''1/2 rod 115 cm

65126
€65.00
Drain valve with hermetic closure 1''1/2 rod 115 cm FAP One side with 60 external and 48 mm internal smooth flange. Other side with smooth flange of 48 external and 40 mm internal. ABS plastic material Black colour. Length 115 cm
FAP - Drain valve 1''1/2 rod 115 cm - 9039M1115N150FT FAP - Drain valve 1''1/2 rod 115 cm - 9039M1115N150FT 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Drain valve 1''1/2 rod 115 cm - 9039M1115N150FT

023 VSP115-FF-T
€65.00
FAP - Hermetically sealed drain valve 1''1/2 rod 115 cm - 9039M1115N150FT 1” 1/2 ABS DRAIN VALVE FOR GRAY WATER Removable handle to shorten the rod. Rod with removable handle. One side with bayonet cap, opposite side with smooth cylindrical connection INTERNAL DIAMETER 48 AND EXTERNAL DIAMETER 60 MM Black colour. STANDARD SHIPPING FOR THIS PRODUCT
FAP - Drain valve 1''1/2 rod 60 cm - 9039MI68 FAP - Drain valve 1''1/2 rod 60 cm - 9039MI68 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Drain valve 1''1/2 rod 60 cm - 9039MI68

65125
€55.00
Hermetically sealed drain valve 1''1/2 rod length 60 cm FAP - 9039MI68 1” 1/2 ABS DRAIN VALVE FOR GRAY WATER Removable handle to shorten the rod. One side with bayonet cap, opposite side with smooth cylindrical connection. Black colour.
FAP - Drain valve 1''1/2 rod 68 cm - 9039M600N150FT FAP - Drain valve 1''1/2 rod 68 cm - 9039M600N150FT 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Drain valve 1''1/2 rod 68 cm - 9039M600N150FT

023 VSP-68-FF-T
€51.00
1''1/2 hermetically sealed drain valve with 68 cm rod, removable, FAP - 9039M600N150FT 1” 1/2 ABS DRAIN VALVE FOR GRAY WATER Removable handle to shorten the rod. Rod with removable handle. One side with bayonet cap, opposite side with smooth cylindrical connection INTERNAL DIAMETER 48 AND EXTERNAL DIAMETER 60 MM Black colour.
FAP - Drain valve 1''1/2 rod 68 cm - 9039M600N150MT FAP - Drain valve 1''1/2 rod 68 cm - 9039M600N150MT 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Drain valve 1''1/2 rod 68 cm - 9039M600N150MT

023 VSP-68-FM-T
€51.00
1''1/2 hermetically sealed drain valve with 68 cm rod, removable, FAP - 9039M600N150MT 1” 1/2 ABS DRAIN VALVE FOR GRAY WATER Removable handle to shorten the rod. Rod with removable handle. One side with bayonet cap, opposite side with smooth cylindrical connection INTERNAL DIAMETER 40 AND EXTERNAL DIAMETER 48 MM Black colour.
FAP - Female flange 3'' internal thread FAP - Female flange 3'' internal thread 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Female flange 3'' internal thread

65061
€3.90
Female flange 3 inch FAP internal thread
FAP - FEMALE FLANGE INTERNAL THREAD EXHAUST VALVES 1''1/2 FAP - FEMALE FLANGE INTERNAL THREAD EXHAUST VALVES 1''1/2 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - FEMALE FLANGE INTERNAL THREAD EXHAUST VALVES 1''1/2

65133
€5.90
FEMALE FLANGE with 1-1/4" internal thread for 1-'1/2" FAP DRAIN VALVES Flange outer diameter dimensions 76 x 76 mm approx
FAP - Gasket for 1.5 inch cap FAP - Gasket for 1.5 inch cap 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Gasket for 1.5 inch cap

VAL154G
€0.70
FAP - Gasket for 1.5 inch cap
FAP - Gray water valve body 1.5 inch - 039DC0003CO FAP - Gray water valve body 1.5 inch - 039DC0003CO 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Gray water valve body 1.5 inch - 039DC0003CO

65077
€18.90
Gray water FAP valve body 1.5 inch - 039DC0003CO Central body only without gaskets and flanges.
FAP - Handle for 3 inch valves FAP - Handle for 3 inch valves 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Handle for 3 inch valves

65122
€9.50
FAP handle for 3 inch valves. The handle has a threaded nut and a snap ring that fits into the existing groove on the valve stem. Can be used as a replacement for the 3 inch valve with 60 cm stem article 7308.
FAP - Quick coupling for 1.5 inch cap FAP - Quick coupling for 1.5 inch cap 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Quick coupling for 1.5 inch cap

65127
€4.70
FAP - 1 1/2 inch bayonet quick coupling with smooth opposite side, for hermetically sealed valves.
FAP - Sleeve 3' inch FAP - Sleeve 3' inch 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Sleeve 3' inch

VAL307
€7.90
Threaded sleeve for 3 inch FAP valve
FAP - Threaded valve fitting for ø 75 pipe FAP - Threaded valve fitting for ø 75 pipe 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP - Threaded valve fitting for ø 75 pipe

VAL318
€4.88
Female threaded FAP valve fitting for ø 75 pipe
FAP - Valve cap 1.5 inches FAP - Valve cap 1.5 inches 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Valve cap 1.5 inches

65132
€8.00
1.5 inch hermetic valve FAP cap
FAP - Valve gasket 1.5 inches FAP - Valve gasket 1.5 inches 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP - Valve gasket 1.5 inches

65130
€1.90
1.5" FAP Hermetic Exhaust Valve Flange Gasket
FAP 1.5 inch grey water drain valve 9039DCTR05 curved... FAP 1.5 inch grey water drain valve 9039DCTR05 curved... 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP 1.5 inch grey water drain valve 9039DCTR05 curved extension TRIGANO

1I0L10000092000
€119.00
FAP 1.5 inch grey water drain valve 9039DCTR05 curved extension TRIGANO One side smooth and the other with a non-threaded flange diameter 48/40 mm. Removable handle and shortenable rod. Rod dimensions: 32 cm handle side + 9 cm inclined side + 12 cm valve side. Total 53 cm from under the handle to the top of the valve body. Offset approximately 11 cm.
FAP flat flange for 1-1 / 2 valve FAP flat flange for 1-1 / 2 valve 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

FAP flat flange for 1-1 / 2 valve

65076
€6.50
FAP flat flange for 1 and 1/2 "hermetically sealed valve
FAP Gasket 3 inch flange for exhaust valves FAP Gasket 3 inch flange for exhaust valves 2
5 days of preparation excluding made to order items
3 scar FAP valves

FAP Gasket 3 inch flange for exhaust valves

VAL310
€1.90
FAP Flange gasket for 3 inch exhaust valves
FEMALE FIXING FLANGE 4x3 FOR WC F connection (NPT) FEMALE FIXING FLANGE 4x3 FOR WC F connection (NPT) 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

FEMALE FIXING FLANGE 4x3 FOR WC F connection (NPT)

65158
€28.90
FEMALE FIXING FLANGE FOR WC Female thread type (NPT) Size: 4 x 3 inches Material: Acrylonitrile Butadiene Styrene (ABS) is resistant to a wide variety of materials ranging from wastewater to commercial household chemical formulations and can be exposed to a wide range of temperatures. The reducer flange is used in residential and commercial waste, exhaust...
Flange for 3 '' cap Flange for 3 '' cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

Flange for 3 '' cap

VAL306
€4.40
Flangia per tappo 3'
Gasket for 3 'cap Gasket for 3 'cap 2
5 days of preparation excluding made to order items
3 scar FAP valves

Gasket for 3 'cap

VAL305G
€1.40
Guarnizione per tappo 3
MALE FIXING FLANGE 4x3 FOR WC - M connection (NPT) MALE FIXING FLANGE 4x3 FOR WC - M connection (NPT) 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

MALE FIXING FLANGE 4x3 FOR WC - M connection (NPT)

65157
€28.90
MALE FIXING FLANGE FOR WC - NPT MALE THREAD Size: 4 x 3 inches Material: Acrylonitrile Butadiene Styrene (ABS) is resistant to a wide variety of materials ranging from wastewater to commercial household chemical formulations and can be exposed to a wide range of temperatures. The reducer flange is used in residential and commercial waste, exhaust and vent...
Non-threaded 1.5 '' FAP female flange Non-threaded 1.5 '' FAP female flange 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

Non-threaded 1.5 '' FAP female flange

65129
€4.70
FAP female flange 1,5 'not threaded, for hermetically sealed valves.
Straight quick coupling 1 1/2 bayonet FAP " Straight quick coupling 1 1/2 bayonet FAP " 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

Straight quick coupling 1 1/2 bayonet FAP "

65131
€9.20
Straight quick coupling 1 "1/2 FAP bayonet hose connector, for hermetically sealed valves
TRIGANO EXHAUST VALVE COMPLETE KIT 1.5 INCH TRIGANO EXHAUST VALVE COMPLETE KIT 1.5 INCH 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

TRIGANO EXHAUST VALVE COMPLETE KIT 1.5 INCH

1I0L40000056000
€159.00
TRIGANO EXHAUST VALVE COMPLETE KIT 1.5 INCH Also mounted on ROLLERTEAM
TRIGANO Kit completo valvola acque di scarico TRIGANO Kit completo valvola acque di scarico 2
5 days of preparation excluding made to order items
1 \ 1/2 "FAP scar valves

TRIGANO Kit completo valvola acque di scarico

1I0L40000056000
€149.00
TRIGANO Complete kit for camper system wastewater valve Consisting of: 40 x 2.3 tubing glued to ball valve Ball Valve D 40 - 1 1/4" - DN32 - PN16 45 degree fitting glued on sliding. 90 degree fitting glued on sliding with gasket. Ball Valve Control Rod Mounted on Riviera, CI, MIZAR, Roller Team, Elliot, Kyros and others.
ZADI - 3 inch female threaded fitting for valves and pipe... ZADI - 3 inch female threaded fitting for valves and pipe... 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - 3 inch female threaded fitting for valves and pipe connection

65117
€4.50
ZADI - 3 inch female threaded fitting for valves and pipe connection
ZADI - 3 inch valve cover ZADI - 3 inch valve cover 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - 3 inch valve cover

65116
€7.90
10ZADI - 3 inch valve cover
ZADI - 3 inch valve gasket ZADI - 3 inch valve gasket 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - 3 inch valve gasket

65118
€1.90
ZADI - 3 inch valve gasket
ZADI - Complete valve 3 inches female flange ZADI - Complete valve 3 inches female flange 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Complete valve 3 inches female flange

65052
€39.90
Complete valve 3" Zadi female flange (body plus flange with female internal thread, opposite side flange with closing cover)
ZADI - Complete valve 3 inches male flange ZADI - Complete valve 3 inches male flange 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Complete valve 3 inches male flange

65051
€39.90
Complete valve 3" Zadi male flange
ZADI - Curved fitting bionet connection for 3 inch valves ZADI - Curved fitting bionet connection for 3 inch valves 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Curved fitting bionet connection for 3 inch valves

65114
€4.90
ZADI - Female threaded connection flange for 3 inch valves ZADI - Female threaded connection flange for 3 inch valves 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Female threaded connection flange for 3 inch valves

65110
€6.90
ZADI - Female threaded connection flange for 3 inch valves
ZADI - Flat flange for 3 inch valves ZADI - Flat flange for 3 inch valves 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Flat flange for 3 inch valves

65112
€3.90
ZADI - Flat flange for 3 inch valves
ZADI - Male threaded fitting for valves 3 inches ZADI - Male threaded fitting for valves 3 inches 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Male threaded fitting for valves 3 inches

65111
€4.00
ZADI - Male threaded fitting for valves 3 inches
ZADI - Replacement handle Valve 3 inches ZADI - Replacement handle Valve 3 inches 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Replacement handle Valve 3 inches

65119
€3.00
Zadi 3 inch Flush Valve Replacement Handle
ZADI - Smooth Bayonet Adapter for 3 inch Valves ZADI - Smooth Bayonet Adapter for 3 inch Valves 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Smooth Bayonet Adapter for 3 inch Valves

65113
€3.95
ZADI - Smooth Bayonet Adapter for 3 inch Valves
ZADI - Straight pipe fitting with bayonet connection for... ZADI - Straight pipe fitting with bayonet connection for... 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI - Straight pipe fitting with bayonet connection for 3 inch valves

65115
€3.90
ZADI - Straight pipe fitting with bayonet connection for 3 inch valves
ZADI PLA233 - 3 inch valve body only with screws and gaskets ZADI PLA233 - 3 inch valve body only with screws and gaskets 2
5 days of preparation excluding made to order items
Valves scar ZADI from 3

ZADI PLA233 - 3 inch valve body only with screws and gaskets

65055
€24.90
ZADI 3 inch PLA233 manually operated drain valve, body only with screws and sealing gaskets. The handle is removable with a threaded brass insert for locking the shaft via a sliding threaded bushing and an elastic ring. Dimensions 335.1 x 114 x 20.6 mm Red handle.
Showing 1-54 of 54 item(s)

  • Viewed products

    Aggancio per Flex Space Aggancio per Flex Space 2
    5 days of preparation excluding made to order items
    BED SPARE PARTS

    Aggancio per Flex Space

    08J002CS3566
    €7.50
    FLEX SPACE - WHITE ROD STOP BRACKET_ART.595-025-0
    DOME RIC VENT 28 F WHITE
    5 days of preparation excluding made to order items
    Porthole spare parts 28x28

    DOME RIC VENT 28 F WHITE

    75228.10
    €27.90
    CUPOLA RIC VENT 28 F WHITE FIAMMA 98683.141
    Eyelet terminal Ø pin 8 - 35 mmq Eyelet terminal Ø pin 8 - 35 mmq 2
    5 days of preparation excluding made to order items
    Faston and cable lugs

    Eyelet terminal Ø pin 8 - 35 mmq

    L1508035
    €1.45
    Eyelet terminal Ø pin 8 - 35 mmq Tinned Ø cable insertion 8.4 mm
    NOT APPROVED Protruding load sign Plastic
    5 days of preparation excluding made to order items
    Signage

    NOT APPROVED Protruding load sign Plastic

    10047
    €5.90
    PANNELLO PORTA CON VETRO DOMETIC PANNELLO PORTA CON VETRO DOMETIC 2
    Out-of-Stock
    DOOR PANEL DOMETIC CARAD

    PANNELLO PORTA CON VETRO DOMETIC

    10010440
    €1,290.00
    DOOR PANEL WITH DOMETIC GLASS Corresponds to point 01 of the attached drawing XXL SHIPPING FOR THIS PRODUCT
    View
    Position and stop light with reflector Ø 122.5 mm Position and stop light with reflector Ø 122.5 mm 2
    5 days of preparation excluding made to order items
    Individual post forms

    Position and stop light with reflector Ø 122.5 mm

    FNL2103
    €49.00
    Module Ø 122.5 mm single double function position / stop.
    ROUND LAMPA WL-1 7 LED 21W 10-30V ROUND LAMPA WL-1 7 LED 21W 10-30V 2
    5 days of preparation excluding made to order items
    Auxiliary lights

    ROUND LAMPA WL-1 7 LED 21W 10-30V

    72311
    €34.00
    ROUND HEADLIGHT WL-1 7 LED 21W 10-30V Product not approved. Not suitable for illuminating the road surface while driving. Aluminum frame, PMMA lens, IP67 waterproof. Steel bracket with fixing screws. 21W wide multivoltage light (7 led x 3W), 6000 ° K - 1400 lumen. Particularly suitable for off-road vehicles, trucks, tractors, forklifts, excavators, etc.
    Seitz compass window S4 L from 700 to 1450mm Seitz compass window S4 L from 700 to 1450mm 2
    5 days of preparation excluding made to order items
    SEITZ S4 windows

    Seitz compass window S4 L from 700 to 1450mm

    35019
    €649.00
    SEITZ DOUBLE GLASS ACRYLIC WINDOWS - WINDOW S4 The windows are ready to be installed complete with integrated blackout blind and roller insect screen. Excellent thermal insulation. From the drop-down list on the right, select the desired size and color of the glass, to find out the cost and availability.
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text