AL-KO Foot 1300 kg Parking H 500
AL-KO Foot 1300 kg Parking H 500
  • -€22.00
AL-KO Foot 1300 kg Parking H 500
AL-KO Foot 1300 kg Parking H 500

AL-KO Foot 1300 kg Parking H 500

5 days of preparation excluding made to order items
€43.00 €65.00 -€22.00
VAT included
43
5 days of preparation excluding made to order items

AL-KO Parking foot H 500 Capacity 1300 Kg

Made of hot-dip galvanized steel, it is equipped with wear-resistant metal sliding bushings.

Static load 800 kg

A = 605

B = 510

C = 260

D = 190

E = 100

H = 500 (* height of support with foot inclined at 60 °)

Threaded rod ☼7 20x4

Weight 3.6 kg

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 

The range of feet can satisfy every application need: caravans and trolleys.

For a stable and safe parking in extreme situations, if using an Al-Ko frame we recommend the use of the support feet
reinforced with increased capacity 2000 kg)

10125
2 Items
No reviews

16 other products in the same category:

AL-KO Foot 1300 kg Parking H 470
Out-of-Stock
Support feet

AL-KO Foot 1300 kg Parking H 470

10124
€68.00
AL-KO Parking foot H 470 Capacity 1300 Kg Made of hot-dip galvanized steel, it is equipped with wear-resistant metal sliding bushings. Static load 800 kg A = 505 B = 470 C = 260 D = 190 E = 100 H = 470 (* height of support with foot inclined at 60 °) Threaded rod ☼7 20x4 Weight 3.4 kg
View
Crankshaft 23 Length 330 Mm
5 days of preparation excluding made to order items
Support feet

Crankshaft 23 Length 330 Mm

910934
€19.00
Crankshaft 23 Length 330 Mm For 23 mm hex nut. Length 330 mm from the bend to the bush.
Plates Pro Gray FLAME 4 pcs. Plates Pro Gray FLAME 4 pcs. 2
5 days of preparation excluding made to order items
Support feet

Plates Pro Gray FLAME 4 pcs.

10434.40
€19.50
Plates Pro Gray FLAME Kit of four anti-sinking bases with four stops to fix the bases on the lifting jacks of vehicles. They can remain mounted during the journey. Weight 200 gr each. Dimensions: 19x14.5 cm.
Operating lever for presser feet
5 days of preparation excluding made to order items
Support feet

Operating lever for presser feet

PDN709
€19.00
Operating lever for presser feet Dimensions approximately Ø 12 x 300 mm Galvanized steel
Crankshaft 19 Length 330 Mm
5 days of preparation excluding made to order items
Support feet

Crankshaft 19 Length 330 Mm

912140
€22.00
Crankshaft 19 Length 330 Mm For 19 mm hex nut. Length 330 mm from the bend to the bush.
Crankshaft 23 Length 540 Mm Crankshaft 23 Length 540 Mm 2
5 days of preparation excluding made to order items
Support feet

Crankshaft 23 Length 540 Mm

921976
€16.00
Crankshaft 23 Length 540 Mm For 23 mm hex nut. Length 540 mm from the bend to the bush.
Pair of parking feet 49.5 / 61.5 c Pair of parking feet 49.5 / 61.5 c 2
5 days of preparation excluding made to order items
Support feet

Pair of parking feet 49.5 / 61.5 c

PDN703
€139.00
Coppia piedini stazionamento 49,5/61,5 c Piedino di stazionamento large. Altezza minima 49,5 cm. Altezza massima 61,5 cm. Peso 5,0 Kg.
Threaded nut pitch 20 x parking feet Threaded nut pitch 20 x parking feet 2
5 days of preparation excluding made to order items
Support feet

Threaded nut pitch 20 x parking feet

PDN9002
€16.90
BUSHINGS FOR PARKING FEET Diameter: 20 mm
Pair of parking feet 27/38 cm Pair of parking feet 27/38 cm 2
5 days of preparation excluding made to order items
Support feet

Pair of parking feet 27/38 cm

PDN701
€122.00
Pair of SMALL parking feet 27/38 cm to park campers, caravans, etc. High thickness galvanized steel, quick assembly without tools and safe. The particular indentation gives each shot an unparalleled seal in any condition. Thanks to the automatic return of the telescopic stem, when the lever is pressed the presser foot returns to the rest position in a few...
UP4 - Electronic stabilizers for caravans UP4 - Electronic stabilizers for caravans 2
Out-of-Stock
Support feet

UP4 - Electronic stabilizers for caravans

UP4
€1,399.00
A higher level of evolution The new UP4 electronic holder system for caravans is the solution to an annoying problem that all caravan owners are familiar with. The system is well designed down to the smallest detail. UP4 can be adapted to the AL-KO chassis at any time. Gross weight: 2500 kg Voltage: 12V Current: 24 A Weight: 34 kg
View
Pair of parking feet 35/48 cm Pair of parking feet 35/48 cm 2
5 days of preparation excluding made to order items
Support feet

Pair of parking feet 35/48 cm

PDN702
€122.00
Pair of parking feet 35/48 cm Small parking foot. Minimum height 27 cm. Maximum height 38 cm. Weight 4 Kg.
Parking foot for camper Jack Parking foot for camper Jack 2
5 days of preparation excluding made to order items
Support feet

Parking foot for camper Jack

922569
€59.00
PARKING FOOT FOR CAMPER JACK Parking foot to be fixed under the chassis, in galvanized steel. Length: 35 to 52 cm Sold individually
Vero-Light Feet GOLDSCHMITT Italia - MANUAL STABILIZERS Vero-Light Feet GOLDSCHMITT Italia - MANUAL STABILIZERS 2
5 days of preparation excluding made to order items
Support feet

Vero-Light Feet GOLDSCHMITT Italia - MANUAL STABILIZERS

47310
€312.00
AL-KO ClickFix support feet, manual crank AL-KO ClickFix support feet, manual crank 2
5 days of preparation excluding made to order items
Support feet

AL-KO ClickFix support feet, manual crank

10980
€459.00
AL-KO ClickFix manual crank support legs AL-KO AMC mechanical ClickFix lifting support Mechanical jack stands can be mounted on vehicles with AL-KO chassis or chassis extensions. The jack stand is simply raised or lowered with a crank handle. This is particularly convenient and quick, as just a half-turn of the crank handle is all it takes to raise or...
Crank 865 mm long CLICKFIX AL-KO feet Crank 865 mm long CLICKFIX AL-KO feet 2
5 days of preparation excluding made to order items
Support feet

Crank 865 mm long CLICKFIX AL-KO feet

10104
€25.00
Long handle for CLICKFIX AL-KO feet 865 mm
Pair of Stabilizing Jack 45 LIPPERT 29/45 450kg Pair of Stabilizing Jack 45 LIPPERT 29/45 450kg 2
5 days of preparation excluding made to order items
Support feet

Pair of Stabilizing Jack 45 LIPPERT 29/45 450kg

10058
€96.00
Pair of Stabilizing Jack 45 LIPPERT 29/45 450kg High thickness steel stabilizer for caravans and motorhomes; special hot dip galvanizing. The stabilizing jack has been designed for vehicles whose required capacity is 450 kg or less, per jack installed. Supplied in pairs. Support surface 250 sq. Mm Weight 2.1 kg Lifting weight 300 kg each.

Customers who bought this product also bought:

Threaded nut pitch 16 x parking feet Threaded nut pitch 16 x parking feet 2
5 days of preparation excluding made to order items
Support feet

Threaded nut pitch 16 x parking feet

PDN9001
€16.90
BUSHINGS FOR PARKING FEET Diameter: 16 mm
Replacement Handle For Brakes Replacement Handle For Brakes 2
5 days of preparation excluding made to order items
Various trailers

Replacement Handle For Brakes

703251
€12.90
VARIOUS SPARE PARTS AL-KO - SPARE HANDLE FOR BRAKES For adjustable rudders: Al-Ko (all models), FTF, FA 3.5.
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text