Expansion cap for water drainage holes from 13 to 17 mm
Expansion cap for water drainage holes from 13...

Expansion cap for water drainage holes from 13 to 17 mm

5 days of preparation excluding made to order items
€4.90
VAT included
4.9
5 days of preparation excluding made to order items

Tappo espansione scarico acqua fori da 13 a 17 mm

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
N2813017
5 Items
No reviews

16 other products in the same category:

Expansion plug for holes Ø 24-25 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 24-25 mm

60081
€8.90
Tappo ad espansione per fori Ø 24-25 mm
DIN 96 CAP WITH TWO HOLES DIN 96 CAP WITH TWO HOLES 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 CAP WITH TWO HOLES

018 TAPP-DIN96
€6.00
DIN 96 CAP WITH TWO HOLES Consisting of a threaded part and a perforated part for connections (hole to be enlarged as needed). Replacement for our article 14870, 14872 showers and tanks. Also to install an immersion pump in a tank and to be able to unscrew the cap to fill it without detaching the connections. Internal thread diameter 96 mm. Height...
Expansion plug for holes Ø 26-27 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 26-27 mm

60082
€7.90
Tappo ad espansione per fori Ø 26-27 mm
Female cap Ø140mm water tanks with rubber gasket exp. Female cap Ø140mm water tanks with rubber gasket exp. 2
5 days of preparation excluding made to order items
Tank accessories

Female cap Ø140mm water tanks with rubber gasket exp.

60037
€9.90
Tappo femmina Ø140 mm perserbatoi acqua, con guarnizione in gomma espansa
Gasket for male cap Ø140mm water tanks Gasket for male cap Ø140mm water tanks 2
5 days of preparation excluding made to order items
Tank accessories

Gasket for male cap Ø140mm water tanks

60038M
€4.50
Guarnizione per Tappo maschio Ø140mm serbatoi acqua Dimensioni c.a. Ø 110/130 spessore 7 mm In gomma 
Male cap Ø140mm for water tanks with rubber gasket Male cap Ø140mm for water tanks with rubber gasket 2
5 days of preparation excluding made to order items
Tank accessories

Male cap Ø140mm for water tanks with rubber gasket

60036
€9.90
Tappo maschio Ø140 mm per serbatoi acqua, con guarnizione in gomma.
Spare tank cap Ø126x34mm Spare tank cap Ø126x34mm 2
Out-of-Stock
Tank accessories

Spare tank cap Ø126x34mm

RAC50310
€6.90
Spare tank cap with gasket. Cannot be used for additional openings. Dimensions: Ø 136 mm. F: Ø 126 the threaded part x 34 mm.
View
COMET shut-off valve with float for water tanks COMET shut-off valve with float for water tanks 2
5 days of preparation excluding made to order items
Tank accessories

COMET shut-off valve with float for water tanks

300/265
€43.00
COMET - closing valve with float (without tank and pump) for direct connection to the water system (max pressure 6 bar), with level adjustment 90° hose connection, 3/8 inch outside the tank The valve (easy to assemble, just drill a hole in a tank as shown in the image or a tank and then mount a submersible pump with relative electrical system and...
Guarnizione per tappo serbatoio acqua
5 days of preparation excluding made to order items
Tank accessories

Guarnizione per tappo serbatoio acqua

925117
€5.50
AC0038 Water Tank Cap Gasket
Gasket for female cap Ø140 mm water tanks Gasket for female cap Ø140 mm water tanks 2
5 days of preparation excluding made to order items
Tank accessories

Gasket for female cap Ø140 mm water tanks

60038F
€3.50
Guarnizione per Tappo femmina Ø140mm serbatoi acqua Dimensioni c.a. Ø 120/140 spessore 7 mm In gomma espansa
Vent for drinking water tanks 22/24 mm Vent for drinking water tanks 22/24 mm 2
5 days of preparation excluding made to order items
Tank accessories

Vent for drinking water tanks 22/24 mm

300/059
€14.90
22/24 mm vent for potable water tanks, complete with threaded bush with nut and gasket. Drilling diameter approx. 33 mm. Total height of the compass about 90 mm. Hole approximately 22mm diameter. To be installed on the bottom of a gray or clear water tank, in order to be able to discharge.
Green tank outlet cap Ø 40 mm for gray water with gasket Green tank outlet cap Ø 40 mm for gray water with gasket 2
5 days of preparation excluding made to order items
Tank accessories

Green tank outlet cap Ø 40 mm for gray water with gasket

913010
€5.90
ACCESSORI PER SERBATOI - TAPPO DI ISPEZIONE Tappo  uscita serbatoio verde  Ø 40 mm acque grigie Con guarnizione.
Additional tank cap Ø160x112x15mm Additional tank cap Ø160x112x15mm 2
5 days of preparation excluding made to order items
Tank accessories

Additional tank cap Ø160x112x15mm

RAC50311
€10.50
Additional inspection tank cap. Consisting of 3 pieces: cap, gasket and ring nut for fixing to the tank. Bayonet type closure. Fixing ring dimension Ø 160 x 112 x 15 mm.
COMET Seal closure DIN51 COMET Seal closure DIN51 2
5 days of preparation excluding made to order items
Tank accessories

COMET Seal closure DIN51

300/006-1
€1.50
COMET DIN51 Seal Closure Dimensions: 64x21 mm approx. Weight about 16 grams Color blue or white or other according to availability.
COMET Replacement cap with gasket COMET Replacement cap with gasket 2
5 days of preparation excluding made to order items
Tank accessories

COMET Replacement cap with gasket

300/010-3
€3.10
COMET Replacement cap with gasket 3/4" Dimensions: 27X28X18 Weight about 10 grams Yellow color
Joint for tank coupling 2
5 days of preparation excluding made to order items
Tank accessories

Joint for tank coupling 2

RAC50354
€9.64
2 '' junction fitting for tank coupling, complete with ring nut and two gaskets. Joint for tank.
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text