Vent for drinking water tanks 22/24 mm
Vent for drinking water tanks 22/24 mm
Vent for drinking water tanks 22/24 mm
Vent for drinking water tanks 22/24 mm

Vent for drinking water tanks 22/24 mm

5 days of preparation excluding made to order items
€14.90
VAT included
14.9
5 days of preparation excluding made to order items

22/24 mm vent for potable water tanks, complete with threaded bush with nut and gasket.

Drilling diameter approx. 33 mm.

Total height of the compass about 90 mm.

Hole approximately 22mm diameter.

To be installed on the bottom of a gray or clear water tank, in order to be able to discharge.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
300/059
4 Items
No reviews

16 other products in the same category:

DIN 96 closure with drain cock / lid DIN 96 closure with drain cock / lid 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 closure with drain cock / lid

300/010-1
€10.80
DIN 96 closure with drain cock / lid
Expansion plug for holes Ø 23 mm for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 23 mm for drinking water

BOC9001
€6.50
Tappo ad espansione per fori Ø 23 mm serbatoi acqua potabile
Expansion plug for holes Ø 26-27 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 26-27 mm

60082
€7.90
Tappo ad espansione per fori Ø 26-27 mm
COMET shut-off valve with float for water tanks COMET shut-off valve with float for water tanks 2
5 days of preparation excluding made to order items
Tank accessories

COMET shut-off valve with float for water tanks

300/265
€43.00
COMET - closing valve with float (without tank and pump) for direct connection to the water system (max pressure 6 bar), with level adjustment 90° hose connection, 3/8 inch outside the tank The valve (easy to assemble, just drill a hole in a tank as shown in the image or a tank and then mount a submersible pump with relative electrical system and...
Mini imbuto pieghevole in silicone Mini imbuto pieghevole in silicone 2
5 days of preparation excluding made to order items
Tank accessories

Mini imbuto pieghevole in silicone

67037
€3.90
Mini collapsible silicone funnel diameter 85 mm x110 mm Made of high quality silicone. Ideal for transferring liquids and topping up engine oil. Compact size, can be hung and folded. Durable, easy to clean and store Dimensions: inlet Ø 85 mm, outlet Ø 14 mm, height 110 mm
120 MM MALE INSPECTION CAP WITHOUT SEAL - AC0038
Out-of-Stock
Tank accessories

120 MM MALE INSPECTION CAP WITHOUT SEAL - AC0038

924758
€7.50
120 MM MALE INSPECTION CAP WITHOUT SEAL - AC00380
View
Additional tank cap Ø160x112x15mm Additional tank cap Ø160x112x15mm 2
5 days of preparation excluding made to order items
Tank accessories

Additional tank cap Ø160x112x15mm

RAC50311
€10.50
Additional inspection tank cap. Consisting of 3 pieces: cap, gasket and ring nut for fixing to the tank. Bayonet type closure. Fixing ring dimension Ø 160 x 112 x 15 mm.
Standard 4.5m strap tank fastening kit Standard 4.5m strap tank fastening kit 2
Out-of-Stock
Tank accessories

Standard 4.5m strap tank fastening kit

15130
€28.50
Standard 4.5m strap tank fastening kit This mounting kit is suitable for mounting a water tank up to a capacity of 200 litres Universal mounting kit for water or gas tanks, including under-vehicle mounting. This kit contains all the parts needed to mount a tank to your vehicle. The mounting strap is made of steel and housed in a plastic cover that...
View
Green tank outlet cap Ø 40 mm for gray water with gasket Green tank outlet cap Ø 40 mm for gray water with gasket 2
5 days of preparation excluding made to order items
Tank accessories

Green tank outlet cap Ø 40 mm for gray water with gasket

913010
€5.90
ACCESSORI PER SERBATOI - TAPPO DI ISPEZIONE Tappo  uscita serbatoio verde  Ø 40 mm acque grigie Con guarnizione.
THETFORD DOC-WASH CISTERN CLEANING KIT - the made in... THETFORD DOC-WASH CISTERN CLEANING KIT - the made in... 2
  • -€14.00
5 days of preparation excluding made to order items
Tank accessories

THETFORD DOC-WASH CISTERN CLEANING KIT - the made in Italy innovation for rinsing...

11870
€45.00 €59.00
THETFORD DOC-WASH CISTERN CLEANING KIT - the made in Italy innovation for rinsing motorhome toilet cisterns System for rinsing toilet cisterns for campers and caravans! Patented product 100% Made in Italy Motorhome travellers are familiar with that unpleasant moment when returning from every trip: emptying and cleaning the toilet cistern. An...
COMET Seal closure DIN51 COMET Seal closure DIN51 2
5 days of preparation excluding made to order items
Tank accessories

COMET Seal closure DIN51

300/006-1
€1.50
COMET DIN51 Seal Closure Dimensions: 64x21 mm approx. Weight about 16 grams Color blue or white or other according to availability.
Expansion plug for holes Ø 24-25 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 24-25 mm

60081
€8.90
Tappo ad espansione per fori Ø 24-25 mm
Tappo per tanica Tappo per tanica 2
5 days of preparation excluding made to order items
Tank accessories

Tappo per tanica

300/084
€4.90
Plug-in cap for canister, with cable entry and pump hose Plug-in cap, not open, with cable passage and tube for the submersible pump. DIN96 Diameter 80 mm
Expansion cap for water drainage holes from 13 to 17 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion cap for water drainage holes from 13 to 17 mm

N2813017
€4.90
Tappo espansione scarico acqua fori da 13 a 17 mm
Set di montaggio Berger Luxus per serbatoio Set di montaggio Berger Luxus per serbatoio 2
5 days of preparation excluding made to order items
Tank accessories

Set di montaggio Berger Luxus per serbatoio

300/075
€28.50
Set of accessories for fixing the water tank Suitable for installation under the floor or in the storage box of all water tanks. Load capacity per tension strap 150 kg! Solid and without deformation. Corrosion Proof: All parts are galvanized, the tension belt is additionally coated with plastic. No risk of expansion due to pressed sheet metal parts.Set SB...
Male cap Ø140mm for water tanks with rubber gasket Male cap Ø140mm for water tanks with rubber gasket 2
5 days of preparation excluding made to order items
Tank accessories

Male cap Ø140mm for water tanks with rubber gasket

60036
€9.90
Tappo maschio Ø140 mm per serbatoi acqua, con guarnizione in gomma.
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text