Teflon tape GAS 12 H x 0.1 mm - 12 metres
Teflon tape GAS 12 H x 0.1 mm - 12 metres

Teflon tape GAS 12 H x 0.1 mm - 12 metres

5 days of preparation excluding made to order items
€0.90
VAT included
0.9
5 days of preparation excluding made to order items

Teflon tape for GAS use 12 H x 0.1 mm - 12 metres

PTFE tape usable for threaded seals of gas pipes.

Wrap the tape on the degreased, clean and dry thread following the direction of the thread, overlapping the layers while maintaining the shape of the thread.

Replaces pasta and hemp. To be used on systems not exceeding 20 bar.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
TG.00
8 Items
No reviews

16 other products in the same category:

Adapter F Italia - F Campingaz - brass thread Adapter F Italia - F Campingaz - brass thread 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adapter F Italia - F Campingaz - brass thread

RO073.02
€6.90
Adapter Female Italy (20 x 1-1/14 inch LH) - Female Campingaz - threaded, brass
FF 1/2 brass sleeve h 28 mm
5 days of preparation excluding made to order items
Threaded gas fittings

FF 1/2 brass sleeve h 28 mm

50258
€3.90
FF 1/2" brass sleeve h 28 mm
Adattatore M Italia - M Campingaz ottone per gas Adattatore M Italia - M Campingaz ottone per gas 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adattatore M Italia - M Campingaz ottone per gas

RO074.06
€8.90
Adapter M Italia - M Campingaz threaded brass for gas (without gasket) Male W20x1/14“ Left to/to Male 16 x 1,5 (campingaz). See picture of the fitting mounted on a blue cylinder, which transforms the Campingaz connection into a male ITALIA like a normal Italian cylinder. It is used to fill Campingaz cylinders in Italy or to adapt them to your Italian...
Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo... Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo... 2
5 days of preparation excluding made to order items
Threaded gas fittings

Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo del gas

108481
€9.90
Swivel angle fitting 1/4 "female gas stove -> 1/4" male gas pipe The joint of the fitting prevents the gas hose from kinking when connecting to the gas cooker, gas grill, etc. Thread: 1/4 "left union nut x 1/4" left thread.
Adapter M Italy - F gas regulator - threaded brass Adapter M Italy - F gas regulator - threaded brass 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adapter M Italy - F gas regulator - threaded brass

RO067.00
€5.90
Male adapter Italy (20 x 1-1/14 inch SX) - Female for gas regulator (20 x 1.5 DX) - threaded, brass
3-way gas fitting with central nut W20 x 1/14 SX ITALIA 3-way gas fitting with central nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way gas fitting with central nut W20 x 1/14 SX ITALIA

R3V-T
€9.90
3-way gas fitting with central nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left-hand W 20 x 1/14” thread into two male outlets Entry Ch25 h16 (W20x1/14" Left) 2x W20x1/14" Left outlet
Male reduction from W20 x 1/14 SX Italian gas cylinder to...
5 days of preparation excluding made to order items
Threaded gas fittings

Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/2" DX male

RO074.02
€3.90
Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/2" RIGHT male - in brass
10MM DUOC HOSE CONNECTION KIT FOR CS
5 days of preparation excluding made to order items
Threaded gas fittings

10MM DUOC HOSE CONNECTION KIT FOR CS

015 5002.611
€34.20
10MM DUOC HOSE CONNECTION KIT FOR CS DUOC supplementary kit to be used with DUOCONTROL CS with a distance between the cylinders greater than 100 cm or for remote mounting of a gas filter for gas pipe with a diameter of 10 mm.
Reduction from F 1/2 to M 3/8 yellow
5 days of preparation excluding made to order items
Threaded gas fittings

Reduction from F 1/2 to M 3/8 yellow

50211
€4.50
Reduction from F 1/2 to M 3/8 yellow
3-way gas fitting with side nut W20 x 1/14 SX ITALIA 3-way gas fitting with side nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way gas fitting with side nut W20 x 1/14 SX ITALIA

R3V
€9.90
3-way gas fitting with side nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left W 20 x 1/14” thread of the gas cylinder into two male outlets. Connection entry ch25h16 (W20x1/14"Sx female) Fitting outlet 2 x W20x1/14"Sx Male Height approximately 100 mm.
Reduction M 3/8 - F 1/4 brass Reduction M 3/8 - F 1/4 brass 2
5 days of preparation excluding made to order items
Threaded gas fittings

Reduction M 3/8 - F 1/4 brass

50209
€3.80
Reduction M 3/8 - F 1/4 brass
Kit of 10 pieces NBR rubber gasket type N for regulators Kit of 10 pieces NBR rubber gasket type N for regulators 2
5 days of preparation excluding made to order items
LPG camping cylinders

Kit of 10 pieces NBR rubber gasket type N for regulators

GBN2598N
€1.90
Kit 10 pieces NBR gasket type "N" for LPG gas regulators.
3-way male brass T fitting W20x1/14 ITALY 3-way male brass T fitting W20x1/14 ITALY 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way male brass T fitting W20x1/14 ITALY

R3VMT
€8.50
3-way male brass fitting W20x1/14" - SX to T - ITALY. To connect a left ITALIA W20x1/814" cylinder with HIGH PRESSURE hose and start again with two identical HIGH PRESSURE hoses connected to two different users.
GOCK Raccordo maschio tedesco G.12 (KLF) - maschio... GOCK Raccordo maschio tedesco G.12 (KLF) - maschio... 2
5 days of preparation excluding made to order items
Threaded gas fittings

GOCK Raccordo maschio tedesco G.12 (KLF) - maschio M20x1,5 AG M20

311/116
€17.90
GOK German male fitting G.12 (KLF) - male M20x1.5 AG M20 Male fitting German connection - male for regulators M20 x 1.5 Also for connecting a low pressure regulator type EN61, EN61-DS or EN71 to the GOK Caramatic SwitchTwo
BLIND NUT ITALIAN THREAD W20X1 1/14 left " BLIND NUT ITALIAN THREAD W20X1 1/14 left " 2
5 days of preparation excluding made to order items
Threaded gas fittings

BLIND NUT ITALIAN THREAD W20X1 1/14 left "

DCSX
€2.90
BLIND NUT ITALIAN THREAD W20X1 1/14 "LEFT Galvanized For closing the male thread of the Italian cylinder and the like. To be used with gasket not included in the supply.
Double male fitting M20x1.5 - M1 / 2
5 days of preparation excluding made to order items
Threaded gas fittings

Double male fitting M20x1.5 - M1 / 2

924773
€4.90
Raccordo doppio maschio M20x1.5 - M1/2" Permette di raccordare i tubi Flexigas e Gazinox su filettature 20 x1,5 femmina (da regolatori gas).

Customers who bought this product also bought:

Brass nut with ogive for copper pipe Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

Brass nut with ogive for copper pipe Ø 8 mm

RGS126
€1.80
Brass nut with ogive for copper pipe Ø 8 mm
Straight gas fitting acc. zinc. copper pipe Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

Straight gas fitting acc. zinc. copper pipe Ø 8 mm

80012
€2.90
Straight galvanized steel gas fitting for pipe Ø 8 mm
1 meter boiled copper pipe diameter 8 mm
5 days of preparation excluding made to order items
Gas cell system

1 meter boiled copper pipe diameter 8 mm

TUB501
€9.90
8 mm diameter boiled copper tube External Ø 8 mm and internal Ø 6 mm. Cold bendable on the curved part or with a special bending tool. Use the appropriate tube cutter for perfect alignment. Sold in 1 meter lengths (select quantity from drop down list).
LPG hose holder with nut and olive Ø 8 x copper LPG hose holder with nut and olive Ø 8 x copper 2
Out-of-Stock
Gas hose fittings

LPG hose holder with nut and olive Ø 8 x copper

RT063.01
€3.50
Hose holder for LPG pipe - PH10 UNI with nut and olive Ø 8 for copper pipe Hose holder length approximately 20 mm.
View
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text