Gas fittings C

10MM DUOC HOSE CONNECTION KIT FOR CS
5 days of preparation excluding made to order items
Threaded gas fittings

10MM DUOC HOSE CONNECTION KIT FOR CS

015 5002.611
€34.20
10MM DUOC HOSE CONNECTION KIT FOR CS DUOC supplementary kit to be used with DUOCONTROL CS with a distance between the cylinders greater than 100 cm or for remote mounting of a gas filter for gas pipe with a diameter of 10 mm.
14x26x1.5 mm diameter Set of 5 rubber gaskets 14x26x1.5 mm diameter Set of 5 rubber gaskets 2
5 days of preparation excluding made to order items
Threaded gas fittings

14x26x1.5 mm diameter Set of 5 rubber gaskets

EC70700011
€1.90
Diameter 14x26x1.5 mm thickness - Set of 5 rubber gaskets for tap as shown in the attached image which transforms the Campingaz attack into an Italia attack. See below in related products
2-way gas connection with shut-off cocks
Out-of-Stock
Gas hose fittings

2-way gas connection with shut-off cocks

8410
€14.90
Connection with shut-off cocks: - 2 PG hose connector outputs dia. 10 mm - female inlet W20x1 / 14 "LH
View
3-way 120° gas hose fitting PH10 UNI TUBE
5 days of preparation excluding made to order items
Gas hose fittings

3-way 120° gas hose fitting PH10 UNI TUBE

RO078.00
€3.90
Brass hose connection for 8 mm diameter gas pipe equipped with 3-way Ph10 UNI. To connect 2 users to a single power source with equal pressure.
3-way gas fitting with central nut W20 x 1/14 SX ITALIA 3-way gas fitting with central nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way gas fitting with central nut W20 x 1/14 SX ITALIA

R3V-T
€9.90
3-way gas fitting with central nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left-hand W 20 x 1/14” thread into two male outlets Entry Ch25 h16 (W20x1/14" Left) 2x W20x1/14" Left outlet
3-way gas fitting with side nut W20 x 1/14 SX ITALIA 3-way gas fitting with side nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way gas fitting with side nut W20 x 1/14 SX ITALIA

R3V
€9.90
3-way gas fitting with side nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left W 20 x 1/14” thread of the gas cylinder into two male outlets. Connection entry ch25h16 (W20x1/14"Sx female) Fitting outlet 2 x W20x1/14"Sx Male Height approximately 100 mm.
3-way male brass T fitting W20x1/14 ITALY 3-way male brass T fitting W20x1/14 ITALY 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way male brass T fitting W20x1/14 ITALY

R3VMT
€8.50
3-way male brass fitting W20x1/14" - SX to T - ITALY. To connect a left ITALIA W20x1/814" cylinder with HIGH PRESSURE hose and start again with two identical HIGH PRESSURE hoses connected to two different users.
3-way T-shaped gas hose fitting for LPG Ph10 UNI hose
5 days of preparation excluding made to order items
Gas hose fittings

3-way T-shaped gas hose fitting for LPG Ph10 UNI hose

RO078.04
€3.90
Brass T hose fitting for 8 mm diameter gas pipe Ph10 UNI - equipped with 3 ways. To connect 2 users to a single power source with equal pressure.
3-way Y-shaped gas hose fitting, Ph10 UNI tube
5 days of preparation excluding made to order items
Gas hose fittings

3-way Y-shaped gas hose fitting, Ph10 UNI tube

RO078.03
€3.50
Brass hose connection for gas pipe diam. 8 mm equipped with 3 ways. To connect 2 users to a single power source with equal pressure.
90 degree connection for TRUMA and GOK regulators... 90 degree connection for TRUMA and GOK regulators... 2
5 days of preparation excluding made to order items
Threaded gas fittings

90 degree connection for TRUMA and GOK regulators EN12864/D - M20x1.5-F20x1.5

015 RR90
€11.90
90 degree connection for TRUMA and GOK regulators EN12864/D - M20x1.5-F20x1.5 To transform the straight outlet of a GOK regulator or TRUMA exchanger or flexible hose or gas filter, with a 90° outlet. To be used in cases where space is not sufficient. Female DX thread for regulator or other on one side and male DX on the other side. Total length approx. 53...
90 Degree Outlet Fitting Kit Camping Bottle Italy
  • Pack
5 days of preparation excluding made to order items
Threaded gas fittings

90 Degree Outlet Fitting Kit Camping Bottle Italy

15539+15806
€19.90
90 Degree Outlet Fitting Kit Camping Bottle Italy Useful for exiting at 90 degrees from the camping-type gas cylinder with vertical connection, when there is little height space such as in vans, campers in general. It also allows you to use a Campingaz type cylinder with only tap A if necessary. Kit consisting of: A= number 1 HORIZONTAL tap for camping...
90 ° fitting for German regulators
5 days of preparation excluding made to order items
Threaded gas fittings

90 ° fitting for German regulators

015 RRD
€27.90
90 ° fitting for German regulators
90 ° galvanized gas fitting for copper pipe Ø 10 mm
5 days of preparation excluding made to order items
Fittings for metall

90 ° galvanized gas fitting for copper pipe Ø 10 mm

80023
€6.60
90 ° gas fitting for copper pipe Ø 10 mm
90 ° gas acc galvanized 8mm x 8mm pipe
5 days of preparation excluding made to order items
Fittings for metall

90 ° gas acc galvanized 8mm x 8mm pipe

015 W8Z8
€9.00
Raccordo 90° gas zincato 8mm x tubo 8mm
90 ° gas fitting for Ø 8 mm tube
5 days of preparation excluding made to order items
Fittings for metall

90 ° gas fitting for Ø 8 mm tube

RGS11B
€4.60
90 ° gas fitting for Ø 8 mm tube
90 ° steel gas fitting for copper pipe Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

90 ° steel gas fitting for copper pipe Ø 8 mm

80013
€4.90
90 ° galvanized steel gas fitting for copper pipe Ø 8 mm
Adapter F Italia - F Campingaz - brass thread Adapter F Italia - F Campingaz - brass thread 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adapter F Italia - F Campingaz - brass thread

RO073.02
€6.90
Adapter Female Italy (20 x 1-1/14 inch LH) - Female Campingaz - threaded, brass
Adapter M Italy - F gas regulator - threaded brass Adapter M Italy - F gas regulator - threaded brass 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adapter M Italy - F gas regulator - threaded brass

RO067.00
€5.90
Male adapter Italy (20 x 1-1/14 inch SX) - Female for gas regulator (20 x 1.5 DX) - threaded, brass
Adattatore M Italia - M Campingaz ottone per gas Adattatore M Italia - M Campingaz ottone per gas 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adattatore M Italia - M Campingaz ottone per gas

RO074.06
€8.90
Adapter M Italia - M Campingaz threaded brass for gas (without gasket) Male W20x1/14“ Left to/to Male 16 x 1,5 (campingaz). See picture of the fitting mounted on a blue cylinder, which transforms the Campingaz connection into a male ITALIA like a normal Italian cylinder. It is used to fill Campingaz cylinders in Italy or to adapt them to your Italian...
Bicone fitting P 91 Ø 10 mm to M20x1.5 Bicone fitting P 91 Ø 10 mm to M20x1.5 2
5 days of preparation excluding made to order items
Threaded gas fittings

Bicone fitting P 91 Ø 10 mm to M20x1.5

924771
€8.50
Bicone fitting P 91 Diameter 10 mm to 20x1.5 To connect rigid pipes of Ø 8 to 10 on a 20 x 1.5 thread from gas regulators
Bicone fitting P 91 Ø 8 mm to 20x1.5 Bicone fitting P 91 Ø 8 mm to 20x1.5 2
5 days of preparation excluding made to order items
Threaded gas fittings

Bicone fitting P 91 Ø 8 mm to 20x1.5

910394
€5.90
Bicone fitting P 91 Diameter 8 mm to 20x1.5 To connect Ø 8 rigid pipes to 20 x 1.5 threads For gas regulators
BLIND NUT ITALIAN THREAD W20X1 1/14 left " BLIND NUT ITALIAN THREAD W20X1 1/14 left " 2
5 days of preparation excluding made to order items
Threaded gas fittings

BLIND NUT ITALIAN THREAD W20X1 1/14 left "

DCSX
€2.90
BLIND NUT ITALIAN THREAD W20X1 1/14 "LEFT Galvanized For closing the male thread of the Italian cylinder and the like. To be used with gasket not included in the supply.
Blind plug M20x1.5 for LPG regulator Blind plug M20x1.5 for LPG regulator 2
5 days of preparation excluding made to order items
Vehicle gas regulators

Blind plug M20x1.5 for LPG regulator

112467
€9.90
Blind plug M20x1.5 for LPG regulator
Brass biconical ogive for gas pipe fittings Ø 10
5 days of preparation excluding made to order items
Fittings for metall

Brass biconical ogive for gas pipe fittings Ø 10

RGS128
€0.60
Brass biconical ogive for gas pipe fittings Ø 10
Brass cap Ø 10 for gas fittings and valves
5 days of preparation excluding made to order items
Fittings for metall

Brass cap Ø 10 for gas fittings and valves

RGS149
€2.20
Brass cap Ø 10 for fittings and gas valves
Brass cap Ø 10 for gas fittings and valves
5 days of preparation excluding made to order items
Fittings for metall

Brass cap Ø 10 for gas fittings and valves

RGS130
€1.10
Brass cap Ø 10 for fittings and gas valves
Brass cap Ø 8 for fittings and gas valves
5 days of preparation excluding made to order items
Fittings for metall

Brass cap Ø 8 for fittings and gas valves

RGS148
€2.30
Brass cap Ø 8 for gas fittings and valves
Brass cap Ø 8 for fittings and gas valves
5 days of preparation excluding made to order items
Fittings for metall

Brass cap Ø 8 for fittings and gas valves

RGS129
€1.20
Brass cap for fittings and gas valves Ø 8 mm
Brass nut with ogive for copper pipe Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

Brass nut with ogive for copper pipe Ø 8 mm

RGS126
€1.80
Brass nut with ogive for copper pipe Ø 8 mm
Conical brass ogive Ø 8 mm for gas pipe fittings
5 days of preparation excluding made to order items
Fittings for metall

Conical brass ogive Ø 8 mm for gas pipe fittings

RGS111
€0.90
Conical brass ogive Ø 8 mm for gas pipe fittings
Connection with LPG cylinder level pressure gauge Connection with LPG cylinder level pressure gauge 2
5 days of preparation excluding made to order items
Threaded gas fittings

Connection with LPG cylinder level pressure gauge

MN000.50
€20.50
Raccordo in ottone con manometro segnalatore per livello bombola GPL Per bombole attacco Italia per caravan, barche, abitazione. L'indicatore è in grado di segnalare visivamente se il livello del gas è minimo Vi evita la sorprersa della bombola gpl vuota Ingresso Italia F20x1/14" sx Uscita Italia M20x1/14 sx
Double Female Connection 20x1.5 - P900101
5 days of preparation excluding made to order items
Threaded gas fittings

Double Female Connection 20x1.5 - P900101

910400
€5.90
DOUBLE FEMALE FITTING 20 x 1.5 - P900101. To connect two elements of gas equipment.
Double LPG hose connector Ø 10
5 days of preparation excluding made to order items
Gas hose fittings

Double LPG hose connector Ø 10

PGD
€2.00
Double LPG hose connector Ø 10 Entry: hose connector Outlet: hose nozzle Material; turned brass Length: 46 mm 10 mm wrench
Double male fitting M20x1.5 - M1 / 2
5 days of preparation excluding made to order items
Threaded gas fittings

Double male fitting M20x1.5 - M1 / 2

924773
€4.90
Raccordo doppio maschio M20x1.5 - M1/2" Permette di raccordare i tubi Flexigas e Gazinox su filettature 20 x1,5 femmina (da regolatori gas).
EU LPG CYLINDER ADAPTERS KIT EU LPG CYLINDER ADAPTERS KIT 2
  • Pack
5 days of preparation excluding made to order items
Threaded gas fittings

EU LPG CYLINDER ADAPTERS KIT

RO073KIT.BL
€18.90
EU LPG CYLINDER ADAPTERS KIT Composed of 4 adapter fittings: Male ITALY - female GERMAN Female ITALY - male GERMAN Female gas regulator - male ITALY Male ITALIA - male CAMPINGAZ (see picture of the fitting mounted on the blue cylinder, which transforms the Campingaz connection into the male ITALIA like a normal Italian cylinder. It is used to fill...
Female fitting 1/2 '' - Ø 8 mm steel P51
5 days of preparation excluding made to order items
Fittings for metall

Female fitting 1/2 '' - Ø 8 mm steel P51

926482
€8.40
Female fitting 1/2 '' - Ø 8 mm steel P51 Ogive Ø 8 mm
FF 1/2 brass sleeve h 28 mm
5 days of preparation excluding made to order items
Threaded gas fittings

FF 1/2 brass sleeve h 28 mm

50258
€3.90
FF 1/2" brass sleeve h 28 mm
Fitting P 17 Male 1/2 - female M20x1.5 "
Out-of-Stock
Threaded gas fittings

Fitting P 17 Male 1/2 - female M20x1.5 "

921200
€6.90
Fitting P 17 Male 1/2 "- female M20x1.5 (for gas regulators)
View
FULL Kit Gas Extraction Fittings D1 - D4 GOK FULL Kit Gas Extraction Fittings D1 - D4 GOK 2
5 days of preparation excluding made to order items
Threaded gas fittings

FULL Kit Gas Extraction Fittings D1 - D4 GOK

106208
€28.00
FULL EUROSET GOK Kit Extraction fittings for European cylinders D1 - D2 - D3 - D4 - GOK All adapters have the German male connection (KLF - with rubber seal) and adapt to gas cylinders on the European market or related systems. FOR THE GERMANS IN EUROPE The reference number is stamped on each adapter . Not approved for use while driving. The set consists...
FULL Kit Gas Filling Fittings D1-D2-D3-D4 GOK 0973800 FULL Kit Gas Filling Fittings D1-D2-D3-D4 GOK 0973800 2
5 days of preparation excluding made to order items
Threaded gas fittings

FULL Kit Gas Filling Fittings D1-D2-D3-D4 GOK 0973800

106324
€27.90
FULL EUROSET GOK kit D1-D2-D3-D4 adapter fittings for pressure regulator with German KLF connection to fill German cylinders through authorized European centers - GOK 0973800 The set consists of 4 adapters and covers the following countries: D1 adapter Italy , Swiss, AG M10 x 1 female x KLF female D2 adapter Italy, Greece, Austria, Slovenia, IG W 20 x...
Gas connection M French F Italian Gas connection M French F Italian 2
5 days of preparation excluding made to order items
Threaded gas fittings

Gas connection M French F Italian

RNOFIMF
€6.90
Gas connection M French F Italian BRASS MATERIAL
Gas connection M Italian F French Gas connection M Italian F French 2
5 days of preparation excluding made to order items
Threaded gas fittings

Gas connection M Italian F French

RNOMIFF
€6.90
Gas connection M Italian F French BRASS MATERIAL
Gas connection M Italian F German Gas connection M Italian F German 2
5 days of preparation excluding made to order items
Threaded gas fittings

Gas connection M Italian F German

RGS106
€5.90
Reduction from: M Italian W20x14" left to F German W21.8x1/14" left In brass
Gas fitting acc zinc copper pipe Ø 8-10 mm reduction
5 days of preparation excluding made to order items
Fittings for metall

Gas fitting acc zinc copper pipe Ø 8-10 mm reduction

80091
€4.90
Gas connection for copper pipe Ø 8-10 mm
Gas fitting acc zinc T reduction for copper pipe Ø...
5 days of preparation excluding made to order items
Fittings for metall

Gas fitting acc zinc T reduction for copper pipe Ø 8-10-10 mm

80095
€10.90
Copper pipe Ø 8-10-10 mm gas reduction fitting (2 of 10 and 1 of 8)
Gas pipe breakage protection device 30mbar 1/4 on the left " Gas pipe breakage protection device 30mbar 1/4 on the left " 2
5 days of preparation excluding made to order items
Threaded gas fittings

Gas pipe breakage protection device 30mbar 1/4 on the left "

108700
€12.90
Gas pipe rupture protection device - 30 mbar 1/4 "left - CAVAGNA 402A Complies with DIN30693 standard 30 mbar 1.5 kg / h Temperature range 0/50 ° C for butane and 20 / + 50 ° C for propane and LPG 1/4 female connection 1/4 male connection Gas type: propane, butane, LPG To be mounted vertically after the gas regulator, in series with the flexible pipe. See...
Gas quick coupling fitting M14x1.5mm for 6532 - 6533 Gas quick coupling fitting M14x1.5mm for 6532 - 6533 2
5 days of preparation excluding made to order items
Quick gas fittings

Gas quick coupling fitting M14x1.5mm for 6532 - 6533

015 02-450-04Y
€21.50
Ø 8 gas quick coupling M14x1.5 mm PS = 5 bar Quick coupling 8 mm For item 6532 - 6533
Gas T fitting acc. zinc. copper pipe Ø 10/10/8 mm
5 days of preparation excluding made to order items
Fittings for metall

Gas T fitting acc. zinc. copper pipe Ø 10/10/8 mm

80092
€10.90
Raccordo gas a T acciaio zincato per tubo rame Ø 0/10/8  mm
Gas T fitting acc. zinc. copper pipe Ø 10/8/8 mm
5 days of preparation excluding made to order items
Fittings for metall

Gas T fitting acc. zinc. copper pipe Ø 10/8/8 mm

80094
€11.00
Galvanized steel gas T fitting for copper pipe Ø 10/8/8 mm
Gas T fitting acc. zinc. copper pipe Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

Gas T fitting acc. zinc. copper pipe Ø 8 mm

80014
€6.40
Galvanized steel gas T fitting for copper pipe Ø 8 mm
Gas T fitting acc. zinc. copper pipe Ø 8/8/10 mm
5 days of preparation excluding made to order items
Fittings for metall

Gas T fitting acc. zinc. copper pipe Ø 8/8/10 mm

80096
€10.90
Galvanized steel gas T fitting for copper pipe Ø 8/8/10 mm
Gasket 20x10x3 for LPG connection in NBR Gasket 20x10x3 for LPG connection in NBR 2
5 days of preparation excluding made to order items
Threaded gas fittings

Gasket 20x10x3 for LPG connection in NBR

FB20300
€1.90
Gasket 20x10x3 for LPG connection in NBR Gasket for LPG regulators in NBR. Suitable for all gas regulators and all threaded adapter fittings. See attached image example. Also suitable for stoves with direct mounting on the cylinder Dimensions: External diameter: 20 mm Internal diameter: 10 mm Thickness: 3mm
German DIN477 M gas connection and Italian F
5 days of preparation excluding made to order items
Threaded gas fittings

German DIN477 M gas connection and Italian F

RGS107-RO073
€6.20
German DIN477 M gas connection and Italian F Connection for gas systems to use an Italian cylinder screw connection with a stove, grill or other equipped with a gas regulator with German thread. Ideal for motorhomes and caravans imported from Germany to use the original German regulator with Italian cylinders. Reduction F Italian W20x14 "left M German...
GOCK Raccordo maschio tedesco G.12 (KLF) - maschio... GOCK Raccordo maschio tedesco G.12 (KLF) - maschio... 2
5 days of preparation excluding made to order items
Threaded gas fittings

GOCK Raccordo maschio tedesco G.12 (KLF) - maschio M20x1,5 AG M20

311/116
€17.90
GOK German male fitting G.12 (KLF) - male M20x1.5 AG M20 Male fitting German connection - male for regulators M20 x 1.5 Also for connecting a low pressure regulator type EN61, EN61-DS or EN71 to the GOK Caramatic SwitchTwo
GOK German male fitting G.2 Shell-F - male M20x1,5 AG M20 GOK German male fitting G.2 Shell-F - male M20x1,5 AG M20 2
5 days of preparation excluding made to order items
Threaded gas fittings

GOK German male fitting G.2 Shell-F - male M20x1,5 AG M20

311/156
€17.90
GOK German male fitting AG Shell-F G.2 - male M20x1,5 AG M20 Male fitting German connection G.2 5 (standard for German cylinders)- male for M20 x 1.5 regulators (standard for camper gas regulators). See attached images.
GOK Quick coupling female g1/4 lh-kn GOK Quick coupling female g1/4 lh-kn 2
5 days of preparation excluding made to order items
Fittings for metall

GOK Quick coupling female g1/4 lh-kn

015 62-447-03Y
€21.00
GOK Quick male coupling 8 mm LPG for 8 mm copper pipe GOK Quick male coupling 8 mm LPG for 8 mm copper pipe 2
5 days of preparation excluding made to order items
Quick gas fittings

GOK Quick male coupling 8 mm LPG for 8 mm copper pipe

310/950
€5.50
GOK 8mm Male LPG Quick Connector for 8mm Copper Pipe It is recommended to fit the fitting after a bicone valve such as our item 15188. The smooth shank must be inserted into the hexagonal nut, interposing the ogive which will create the seal when tightened. Side 1: 8mm gas quick connect Side 2: cylindrical shank diameter 8 mm
GOK Reinforcement nipple for copper pipes Ø 8 mm GOK Reinforcement nipple for copper pipes Ø 8 mm 2
5 days of preparation excluding made to order items
Fittings for metall

GOK Reinforcement nipple for copper pipes Ø 8 mm

80055
€1.30
GOK Reinforcement nipple for copper pipes Ø 8 mm Inserted into the copper tube, it prevents deformation during tightening.
GOK Replacement nipple quick coupling connection for... GOK Replacement nipple quick coupling connection for... 2
5 days of preparation excluding made to order items
Fittings for metall

GOK Replacement nipple quick coupling connection for copper pipe 8 mm

015 62-447-10Y
€8.90
GOK Replacement nipple quick coupling connection with spinner for 8 mm copper pipe (see image female part not supplied) Ogive connection for copper pipe 8mm
GOK Replacement nipple RST8 quick coupling GOK Replacement nipple RST8 quick coupling 2
5 days of preparation excluding made to order items
Fittings for metall

GOK Replacement nipple RST8 quick coupling

015 62-447-11Y
€8.90
GOK RST8 quick coupling replacement nipple (see image female part not supplied) 1/4" male thread connection
Hose connection for Ø 8 mm gas pipe
5 days of preparation excluding made to order items
Gas hose fittings

Hose connection for Ø 8 mm gas pipe

015 PGO
€4.50
Hose connection for 8 mm diameter gas pipe and 8 mm diameter copper pipe on the opposite side. Complete with spinner and nut Length for hose holder approximately 32 mm.
Hose connector for gas regulators 3/8 SN connection
5 days of preparation excluding made to order items
Gas hose fittings

Hose connector for gas regulators 3/8 SN connection

015 PG
€2.50
Hose connector for gas regulators 3/8 SN connection
Hose holder for LPG 1/8 M to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG 1/8 M to PH10 UNI

RO084.-03
€2.20
Hose holder for LPG 1/8 M to PH10 UNI Brass hose holder. G1/8" male inlet Outlet: diameter 10 hose holder.
Hose holder for LPG from 1/2 F to PH10 UNI
Out-of-Stock
Gas hose fittings

Hose holder for LPG from 1/2 F to PH10 UNI

RO082.03
€4.90
Hose holder for LPG from 1/2 F to PH10 UNI Brass hose holder. G1/2" female inlet Outlet: diameter 10 hose holder.
View
Hose holder for LPG from 1/2 M to PH10 UNI
Out-of-Stock
Gas hose fittings

Hose holder for LPG from 1/2 M to PH10 UNI

RO084.06
€4.90
Hose holder for LPG from 1/2 M to PH10 UNI Brass hose holder. G1/2" male inlet Outlet: diameter 10 hose holder.
View
Hose holder for LPG from 1/4 F to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG from 1/4 F to PH10 UNI

RO082.01
€2.90
Hose holder for LPG from 1/4 F to PH10 UNI Brass hose holder. G1/4" female inlet Outlet: diameter 10 hose holder.
Hose holder for LPG from 1/4 M to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG from 1/4 M to PH10 UNI

RO084.04
€2.20
Hose holder for LPG from 1/4 M to PH10 UNI Brass hose holder. G1/4" male inlet Outlet: diameter 10 hose holder.
Hose holder for LPG from 1/8 F DX to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG from 1/8 F DX to PH10 UNI

RO082.00
€1.90
Hose holder for LPG from 1/8 F DX to PH10 UNI Brass G1/8" female inlet Outlet: diameter 10 hose holder.
Hose holder for LPG from 3/8 F to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG from 3/8 F to PH10 UNI

RO082.02
€3.90
Hose holder for LPG from 3/8 F to PH10 UNI Brass G3/8" female inlet Outlet: diameter 10 hose holder.
Hose holder for LPG from 3/8 M to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG from 3/8 M to PH10 UNI

RO084.05
€3.40
Hose holder for LPG from 3/8 M to PH10 UNI Brass hose holder. G3/8" male inlet Outlet: diameter 10 hose holder.
Kit of 10 pieces NBR rubber gasket type N for regulators Kit of 10 pieces NBR rubber gasket type N for regulators 2
5 days of preparation excluding made to order items
LPG camping cylinders

Kit of 10 pieces NBR rubber gasket type N for regulators

GBN2598N
€1.90
Kit 10 pieces NBR gasket type "N" for LPG gas regulators.
LPG hose holder with nut and olive Ø 8 x copper LPG hose holder with nut and olive Ø 8 x copper 2
Out-of-Stock
Gas hose fittings

LPG hose holder with nut and olive Ø 8 x copper

RT063.01
€3.50
Hose holder for LPG pipe - PH10 UNI with nut and olive Ø 8 for copper pipe Hose holder length approximately 20 mm.
View
Male reduction from W20 x 1/14 SX Italian gas cylinder to...
5 days of preparation excluding made to order items
Threaded gas fittings

Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/2" DX male

RO074.02
€3.90
Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/2" RIGHT male - in brass
Male reduction from W20 x 1/14 SX Italian gas cylinder to...
5 days of preparation excluding made to order items
Threaded gas fittings

Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/4" DX male

RO074.00
€4.40
Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/4" DX male - in brass
Male reduction from W20 x 1/14 SX Italian gas cylinder to...
5 days of preparation excluding made to order items
Threaded gas fittings

Male reduction from W20 x 1/14 SX Italian gas cylinder to 3/8" DX male

RO074.01
€4.40
Male reduction from W20 x 1/14 SX Italian gas cylinder to 3/8" DX male - in brass
Male to male fitting W20 x 1/14 SX gas cylinder Italy
5 days of preparation excluding made to order items
Threaded gas fittings

Male to male fitting W20 x 1/14 SX gas cylinder Italy

RO074.03
€4.40
Male to male fitting W20 x 1/14 SX Italian gas cylinder, in brass
Metal clamps band 9 mm hose clamp 10/17
5 days of preparation excluding made to order items
Flexible Tubing Hoses

Metal clamps band 9 mm hose clamp 10/17

TM010
€0.50
Metal clamps M010 from 10 to 17 mm. Band height 9 mm.
Niples M-1/2 / M-3/8 "brass"
5 days of preparation excluding made to order items
Threaded gas fittings

Niples M-1/2 / M-3/8 "brass"

5253
€4.90
Niples M-1/2 "/ M-3/8" brass For example, to connect gas hoses with 1/2 "female connection to gas regulators with 3/8" female connection.
Nut W20x1/14 F-SX and hose holder for LPG PH10 UNI
5 days of preparation excluding made to order items
Threaded gas fittings

Nut W20x1/14 F-SX and hose holder for LPG PH10 UNI

RO076.BL
€4.90
W20 x 1/14" left female nut and hose connector for LPG PH10 UNi In brass To connect a cylinder with ITALIA connection to a user using a hose holder. CAUTION: Use outdoors only. The pressure of the LPG gas cylinder is high and would require a threaded connection.
NUT W20x1/4 SX - INJECTOR M1/4 RIGHT
5 days of preparation excluding made to order items
Threaded gas fittings

NUT W20x1/4 SX - INJECTOR M1/4 RIGHT

RO083.00
€4.20
Left nut BOTTLE ITALIA W20x1/4 SX with M1/4 RIGHT injector . Nut W 20 x 1/4" left. Right 1/4" male injector. In yellow brass. Used to connect LPG gas regulators with 1/4 female connection directly to cylinders, tanks or control units.
Nut with brass ogive for copper pipe Ø 10 mm
5 days of preparation excluding made to order items
Fittings for metall

Nut with brass ogive for copper pipe Ø 10 mm

RGS127
€1.80
Nut with brass ogive for copper pipe Ø 10 mm
Ogive with slot for steel pipes Ø 10 mm
5 days of preparation excluding made to order items
Fittings for metall

Ogive with slot for steel pipes Ø 10 mm

RGS136
€0.90
Ogive Ø 10 mm with slot for steel pipes
Ogive with slot for steel pipes Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

Ogive with slot for steel pipes Ø 8 mm

80057
€0.90
Ogive Ø 8 mm with slot for steel pipes
PG
5 days of preparation excluding made to order items
Gas hose fittings

PG

RO079.00
€4.90
4-way brass hose connection for gas pipe diameter 8 mm Ph10 UNI . To connect multiple users to a single power source with equal pressure.
Pipe fitting acc. Ø 10 mm smooth shank Ø 8 x valve
5 days of preparation excluding made to order items
Fittings for metall

Pipe fitting acc. Ø 10 mm smooth shank Ø 8 x valve

015 G10Z8
€6.90
Straight steel fitting for copper pipe Ø 10 mm with smooth shank outlet Ø 8 for valve
Quick gas connection for Ø 8 mm copper pipe Quick gas connection for Ø 8 mm copper pipe 2
5 days of preparation excluding made to order items
Quick gas fittings

Quick gas connection for Ø 8 mm copper pipe

RGS113
€19.00
Quick-connect gas fitting for Ø 8 mm copper pipe Complete with 10 mm diameter hose connection and protective cap to protect the quick connection from dust when the fitting is not inserted.
Quick gas fitting - hose connection Ø 6 mm
5 days of preparation excluding made to order items
Quick gas fittings

Quick gas fitting - hose connection Ø 6 mm

RGS134
€2.20
Quick gas fitting - hose connection Ø 6 mm
Quick gas fitting - hose connection Ø 6 mm
5 days of preparation excluding made to order items
Quick gas fittings

Quick gas fitting - hose connection Ø 6 mm

80049
€2.90
Quick gas connection - hose connector Ø 6 mm x tube Ø 8 mm
Quick gas hose connector Ø 8 mm for 10362
5 days of preparation excluding made to order items
Quick gas fittings

Quick gas hose connector Ø 8 mm for 10362

80028
€2.50
Raccordo gas portagomma Ø 8 mm - innesto rapido Per articolo 10362
Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo... Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo... 2
5 days of preparation excluding made to order items
Threaded gas fittings

Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo del gas

108481
€9.90
Swivel angle fitting 1/4 "female gas stove -> 1/4" male gas pipe The joint of the fitting prevents the gas hose from kinking when connecting to the gas cooker, gas grill, etc. Thread: 1/4 "left union nut x 1/4" left thread.
Reduction from F 1/2 to M 3/8 yellow
5 days of preparation excluding made to order items
Threaded gas fittings

Reduction from F 1/2 to M 3/8 yellow

50211
€4.50
Reduction from F 1/2 to M 3/8 yellow
Reduction M 3/8 - F 1/4 brass Reduction M 3/8 - F 1/4 brass 2
5 days of preparation excluding made to order items
Threaded gas fittings

Reduction M 3/8 - F 1/4 brass

50209
€3.80
Reduction M 3/8 - F 1/4 brass
Reduction sleeve F1 / 4-F1 / 8 "brass nickel"
5 days of preparation excluding made to order items
Fittings for metall

Reduction sleeve F1 / 4-F1 / 8 "brass nickel"

030100001ATNB
€1.80
Reduction sleeve in nickel-plated brass F1 / 4 "- F1 / 8" A = 1/4 " A1 = 1/8 " L = 19 mm CH = 17 mm
Regulator Fittings Kit ITA-EU Cylinders Regulator Fittings Kit ITA-EU Cylinders 2
5 days of preparation excluding made to order items
Threaded gas fittings

Regulator Fittings Kit ITA-EU Cylinders

015 EUROSET
€35.90
EUROSET GOK of adapter fittings cylinders / regulators ITALY connection for EUROPEAN cylinders of the following countries: FOR ITALIANS GOING ABROAD With this kit you have three fittings to place between the gas regulator input of an Italian camper system and the cylinders that you will purchase in the countries indicated. Adapter 1 Italy, Switzerland,...
Steel pipe connection Ø 8 mm smooth shank Ø 10 x valve
5 days of preparation excluding made to order items
Fittings for metall

Steel pipe connection Ø 8 mm smooth shank Ø 10 x valve

015 07-223-00
€4.90
Straight steel fitting for Ø 8 mm copper pipe with Ø 10 smooth shank outlet for valve
Straight gas fitting acc. zinc. copper pipe Ø 10 mm
5 days of preparation excluding made to order items
Fittings for metall

Straight gas fitting acc. zinc. copper pipe Ø 10 mm

80090
€3.50
Straight galvanized steel gas fitting for copper pipe Ø 10 mm
Straight gas fitting acc. zinc. copper pipe Ø 8 mm
5 days of preparation excluding made to order items
Fittings for metall

Straight gas fitting acc. zinc. copper pipe Ø 8 mm

80012
€2.90
Straight galvanized steel gas fitting for pipe Ø 8 mm
Teflon tape GAS 12 H x 0.1 mm - 12 metres
5 days of preparation excluding made to order items
Threaded gas fittings

Teflon tape GAS 12 H x 0.1 mm - 12 metres

TG.00
€0.90
Teflon tape for GAS use 12 H x 0.1 mm - 12 metres PTFE tape usable for threaded seals of gas pipes. Wrap the tape on the degreased, clean and dry thread following the direction of the thread, overlapping the layers while maintaining the shape of the thread. Replaces pasta and hemp. To be used on systems not exceeding 20 bar.
Wall pass fitting acc galvanized 90 ° gas 8mm galvanized
Out-of-Stock
Fittings for metall

Wall pass fitting acc galvanized 90 ° gas 8mm galvanized

015 RGPP
€23.90
90 ° gas 8mm galvanized wall pass fitting
View
Showing 1-99 of 99 item(s)

  • Viewed products

    BALDACCI - V510 Polished chrome furniture handle kit BALDACCI - V510 Polished chrome furniture handle kit 2
    5 days of preparation excluding made to order items
    Door handle closures

    BALDACCI - V510 Polished chrome furniture handle kit

    24254.45
    €8.90
    BALDACCI Handle Kit for Furniture V510 polished chrome 93 x 19 mm Concealed pull-open type Die-cast zamak handle AS128 mechanism AS130 counterboard h 9 mm AS195 counterboard h 11 mm
    CBE 512040 Sonda elettronica fissa CBE 512040 Sonda elettronica fissa 2
    5 days of preparation excluding made to order items
    Water level indicators

    CBE 512040 Sonda elettronica fissa

    512040
    €67.00
    CBE 512040 Fixed electronic probe with 2 rods - 40 cm No. 2 385 mm probes under flange
    DOOR SEAL CARAD-R/RF/R100F - BG 2177 DOOR SEAL CARAD-R/RF/R100F - BG 2177 2
    5 days of preparation excluding made to order items
    DOOR PANEL DOMETIC CARAD

    DOOR SEAL CARAD-R/RF/R100F - BG 2177

    D32765000
    €49.00
    CARAD-R/RF/R100F SEITZ DOOR SEAL - BG 2177 Corresponds to point 03 of the attached drawing
    Ductable heater 63W 12V TenereD Ductable heater 63W 12V TenereD 2
    5 days of preparation excluding made to order items
    Heat Exchanged Products

    Ductable heater 63W 12V TenereD

    RIS260
    €155.00
    Riscaldatore canalizzabile 63W 12V TenereD Dotato di due bocchette, consente il collegamento all’impianto di canalizzazione dell’aria del veicolo. DATI TECNICI Assorbimento 63 W Potere calorifico 3000 W - 2580 Kcal/h Portata d’aria 185 m³/h Peso 3.3 Kg Il riscaldatore Thermobile Tenere D è formato da un radiatore e da una ventola; il radiatore va...
    KIT OF 10 MINI FUSES FROM 7.5 TO 30a KIT OF 10 MINI FUSES FROM 7.5 TO 30a 2
    5 days of preparation excluding made to order items
    Fusib kit. and various

    KIT OF 10 MINI FUSES FROM 7.5 TO 30a

    70085
    €1.50
    KIT OF 10 MINI FUSES Width 10.9mm 2 x 7.5A - 2 x 10A - 2 x 15A - 2 x 20A - 1 x 25A - 1 x 30A
    Thule Single Step V10 - V15 THULE 12V motor - 1500602970 Thule Single Step V10 - V15 THULE 12V motor - 1500602970 2
    5 days of preparation excluding made to order items
    THULE step spare parts

    Thule Single Step V10 - V15 THULE 12V motor - 1500602970

    703387
    €139.00
    Motore Thule Single Step V10 e V15 THULE 12V Punto 1 dell'esploso
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text