Nut W20x1/14 F-SX and hose holder for LPG PH10 UNI
Nut W20x1/14 F-SX and hose holder for LPG PH10 UNI

Nut W20x1/14 F-SX and hose holder for LPG PH10 UNI

5 days of preparation excluding made to order items
€4.90
VAT included
4.9
5 days of preparation excluding made to order items

W20 x 1/14" left female nut and hose connector for LPG PH10 UNi

In brass

To connect a cylinder with ITALIA connection to a user using a hose holder.

CAUTION: Use outdoors only. The pressure of the LPG gas cylinder is high and would require a threaded connection.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
RO076.BL
7 Items
No reviews

16 other products in the same category:

Regulator Fittings Kit ITA-EU Cylinders Regulator Fittings Kit ITA-EU Cylinders 2
5 days of preparation excluding made to order items
Threaded gas fittings

Regulator Fittings Kit ITA-EU Cylinders

015 EUROSET
€35.90
EUROSET GOK of adapter fittings cylinders / regulators ITALY connection for EUROPEAN cylinders of the following countries: FOR ITALIANS GOING ABROAD With this kit you have three fittings to place between the gas regulator input of an Italian camper system and the cylinders that you will purchase in the countries indicated. Adapter 1 Italy, Switzerland,...
Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo... Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo... 2
5 days of preparation excluding made to order items
Threaded gas fittings

Raccordo ad angolo girevole 1/4" fornello a gas vs. tubo del gas

108481
€9.90
Swivel angle fitting 1/4 "female gas stove -> 1/4" male gas pipe The joint of the fitting prevents the gas hose from kinking when connecting to the gas cooker, gas grill, etc. Thread: 1/4 "left union nut x 1/4" left thread.
3-way gas fitting with central nut W20 x 1/14 SX ITALIA 3-way gas fitting with central nut W20 x 1/14 SX ITALIA 2
5 days of preparation excluding made to order items
Threaded gas fittings

3-way gas fitting with central nut W20 x 1/14 SX ITALIA

R3V-T
€9.90
3-way gas fitting with central nut W20 x 1/14 SX ITALIA Duplicates the male outlet of the left-hand W 20 x 1/14” thread into two male outlets Entry Ch25 h16 (W20x1/14" Left) 2x W20x1/14" Left outlet
Male reduction from W20 x 1/14 SX Italian gas cylinder to...
5 days of preparation excluding made to order items
Threaded gas fittings

Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/2" DX male

RO074.02
€3.90
Male reduction from W20 x 1/14 SX Italian gas cylinder to 1/2" RIGHT male - in brass
Bicone fitting P 91 Ø 8 mm to 20x1.5 Bicone fitting P 91 Ø 8 mm to 20x1.5 2
5 days of preparation excluding made to order items
Threaded gas fittings

Bicone fitting P 91 Ø 8 mm to 20x1.5

910394
€5.90
Bicone fitting P 91 Diameter 8 mm to 20x1.5 To connect Ø 8 rigid pipes to 20 x 1.5 threads For gas regulators
NUT W20x1/4 SX - INJECTOR M1/4 RIGHT
5 days of preparation excluding made to order items
Threaded gas fittings

NUT W20x1/4 SX - INJECTOR M1/4 RIGHT

RO083.00
€4.20
Left nut BOTTLE ITALIA W20x1/4 SX with M1/4 RIGHT injector . Nut W 20 x 1/4" left. Right 1/4" male injector. In yellow brass. Used to connect LPG gas regulators with 1/4 female connection directly to cylinders, tanks or control units.
Adattatore M Italia - M Campingaz ottone per gas Adattatore M Italia - M Campingaz ottone per gas 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adattatore M Italia - M Campingaz ottone per gas

RO074.06
€8.90
Adapter M Italia - M Campingaz threaded brass for gas (without gasket) Male W20x1/14“ Left to/to Male 16 x 1,5 (campingaz). See picture of the fitting mounted on a blue cylinder, which transforms the Campingaz connection into a male ITALIA like a normal Italian cylinder. It is used to fill Campingaz cylinders in Italy or to adapt them to your Italian...
FULL Kit Gas Filling Fittings D1-D2-D3-D4 GOK 0973800 FULL Kit Gas Filling Fittings D1-D2-D3-D4 GOK 0973800 2
5 days of preparation excluding made to order items
Threaded gas fittings

FULL Kit Gas Filling Fittings D1-D2-D3-D4 GOK 0973800

106324
€27.90
FULL EUROSET GOK kit D1-D2-D3-D4 adapter fittings for pressure regulator with German KLF connection to fill German cylinders through authorized European centers - GOK 0973800 The set consists of 4 adapters and covers the following countries: D1 adapter Italy , Swiss, AG M10 x 1 female x KLF female D2 adapter Italy, Greece, Austria, Slovenia, IG W 20 x...
GOCK Raccordo maschio tedesco G.12 (KLF) - maschio... GOCK Raccordo maschio tedesco G.12 (KLF) - maschio... 2
5 days of preparation excluding made to order items
Threaded gas fittings

GOCK Raccordo maschio tedesco G.12 (KLF) - maschio M20x1,5 AG M20

311/116
€17.90
GOK German male fitting G.12 (KLF) - male M20x1.5 AG M20 Male fitting German connection - male for regulators M20 x 1.5 Also for connecting a low pressure regulator type EN61, EN61-DS or EN71 to the GOK Caramatic SwitchTwo
90 Degree Outlet Fitting Kit Camping Bottle Italy
  • Pack
5 days of preparation excluding made to order items
Threaded gas fittings

90 Degree Outlet Fitting Kit Camping Bottle Italy

15539+15806
€19.90
90 Degree Outlet Fitting Kit Camping Bottle Italy Useful for exiting at 90 degrees from the camping-type gas cylinder with vertical connection, when there is little height space such as in vans, campers in general. It also allows you to use a Campingaz type cylinder with only tap A if necessary. Kit consisting of: A= number 1 HORIZONTAL tap for camping...
90 degree connection for TRUMA and GOK regulators... 90 degree connection for TRUMA and GOK regulators... 2
5 days of preparation excluding made to order items
Threaded gas fittings

90 degree connection for TRUMA and GOK regulators EN12864/D - M20x1.5-F20x1.5

015 RR90
€11.90
90 degree connection for TRUMA and GOK regulators EN12864/D - M20x1.5-F20x1.5 To transform the straight outlet of a GOK regulator or TRUMA exchanger or flexible hose or gas filter, with a 90° outlet. To be used in cases where space is not sufficient. Female DX thread for regulator or other on one side and male DX on the other side. Total length approx. 53...
Kit of 10 pieces NBR rubber gasket type N for regulators Kit of 10 pieces NBR rubber gasket type N for regulators 2
5 days of preparation excluding made to order items
LPG camping cylinders

Kit of 10 pieces NBR rubber gasket type N for regulators

GBN2598N
€1.90
Kit 10 pieces NBR gasket type "N" for LPG gas regulators.
Reduction from F 1/2 to M 3/8 yellow
5 days of preparation excluding made to order items
Threaded gas fittings

Reduction from F 1/2 to M 3/8 yellow

50211
€4.50
Reduction from F 1/2 to M 3/8 yellow
Male reduction from W20 x 1/14 SX Italian gas cylinder to...
5 days of preparation excluding made to order items
Threaded gas fittings

Male reduction from W20 x 1/14 SX Italian gas cylinder to 3/8" DX male

RO074.01
€4.40
Male reduction from W20 x 1/14 SX Italian gas cylinder to 3/8" DX male - in brass
Teflon tape GAS 12 H x 0.1 mm - 12 metres
5 days of preparation excluding made to order items
Threaded gas fittings

Teflon tape GAS 12 H x 0.1 mm - 12 metres

TG.00
€0.90
Teflon tape for GAS use 12 H x 0.1 mm - 12 metres PTFE tape usable for threaded seals of gas pipes. Wrap the tape on the degreased, clean and dry thread following the direction of the thread, overlapping the layers while maintaining the shape of the thread. Replaces pasta and hemp. To be used on systems not exceeding 20 bar.
Adapter M Italy - F gas regulator - threaded brass Adapter M Italy - F gas regulator - threaded brass 2
5 days of preparation excluding made to order items
Threaded gas fittings

Adapter M Italy - F gas regulator - threaded brass

RO067.00
€5.90
Male adapter Italy (20 x 1-1/14 inch SX) - Female for gas regulator (20 x 1.5 DX) - threaded, brass

Customers who bought this product also bought:

Hose holder for LPG from 3/8 M to PH10 UNI
5 days of preparation excluding made to order items
Gas hose fittings

Hose holder for LPG from 3/8 M to PH10 UNI

RO084.05
€3.40
Hose holder for LPG from 3/8 M to PH10 UNI Brass hose holder. G3/8" male inlet Outlet: diameter 10 hose holder.
Double LPG hose connector Ø 10
5 days of preparation excluding made to order items
Gas hose fittings

Double LPG hose connector Ø 10

PGD
€2.00
Double LPG hose connector Ø 10 Entry: hose connector Outlet: hose nozzle Material; turned brass Length: 46 mm 10 mm wrench
QUICK-ON HORIZ ADAPTER Ø22 TO W20X1 / 14SX " QUICK-ON HORIZ ADAPTER Ø22 TO W20X1 / 14SX " 2
5 days of preparation excluding made to order items
Gas bottle adapters

QUICK-ON HORIZ ADAPTER Ø22 TO W20X1 / 14SX "

AB22O
€14.00
COMPACT HIGH PRESSURE ADAPTER FOR AGIP CYLINDER WITH SHUT-OFF TAP FROM QUICK-ON Ø22 TO W20 X 1/14 "LEFT HORIZONTAL ATTACHMENT TYPES 640 SRG At inlet pressure between 0.3 and 16 bar, capacity of 8.0 kg of gas / h. The product image is representative and represents the function; the brand can change according to availability.
Connection with LPG cylinder level pressure gauge Connection with LPG cylinder level pressure gauge 2
5 days of preparation excluding made to order items
Threaded gas fittings

Connection with LPG cylinder level pressure gauge

MN000.50
€20.50
Raccordo in ottone con manometro segnalatore per livello bombola GPL Per bombole attacco Italia per caravan, barche, abitazione. L'indicatore è in grado di segnalare visivamente se il livello del gas è minimo Vi evita la sorprersa della bombola gpl vuota Ingresso Italia F20x1/14" sx Uscita Italia M20x1/14 sx
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text