Expansion plug for holes Ø 23 mm for drinking water
Expansion plug for holes Ø 23 mm for drinking...

Expansion plug for holes Ø 23 mm for drinking water

5 days of preparation excluding made to order items
€6.50
VAT included
6.5
5 days of preparation excluding made to order items

Tappo ad espansione per fori Ø 23 mm serbatoi acqua potabile

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
BOC9001
5 Items
No reviews

16 other products in the same category:

Joint for tank coupling 2
5 days of preparation excluding made to order items
Tank accessories

Joint for tank coupling 2

RAC50354
€9.64
2 '' junction fitting for tank coupling, complete with ring nut and two gaskets. Joint for tank.
Steel tape kit with 8 clamps - 300 cm Steel tape kit with 8 clamps - 300 cm 2
5 days of preparation excluding made to order items
Tank accessories

Steel tape kit with 8 clamps - 300 cm

70023
€7.00
Steel tape kit with 8 clamps - 300 cm Universal for pipes, filters, fittings Cut the ribbon with a margin of at least 4 cm to insert the clamp.
Expansion cap for Ø 42 mm holes for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion cap for Ø 42 mm holes for drinking water

BOC9003
€9.90
Expansion cap for Ø 42 mm drinking water tank holes
Expansion cap for water drainage holes from 13 to 17 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion cap for water drainage holes from 13 to 17 mm

N2813017
€4.90
Tappo espansione scarico acqua fori da 13 a 17 mm
Female cap Ø140mm water tanks with rubber gasket exp. Female cap Ø140mm water tanks with rubber gasket exp. 2
5 days of preparation excluding made to order items
Tank accessories

Female cap Ø140mm water tanks with rubber gasket exp.

60037
€9.90
Tappo femmina Ø140 mm perserbatoi acqua, con guarnizione in gomma espansa
Gasket for male cap Ø140mm water tanks Gasket for male cap Ø140mm water tanks 2
5 days of preparation excluding made to order items
Tank accessories

Gasket for male cap Ø140mm water tanks

60038M
€4.50
Guarnizione per Tappo maschio Ø140mm serbatoi acqua Dimensioni c.a. Ø 110/130 spessore 7 mm In gomma 
Expansion plug for holes Ø 33 mm for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 33 mm for drinking water

BOC9002
€7.90
Expansion plug for holes Ø 33 mm for drinking water tanks
120 MM MALE INSPECTION CAP WITHOUT SEAL - AC0038
Out-of-Stock
Tank accessories

120 MM MALE INSPECTION CAP WITHOUT SEAL - AC0038

924758
€7.50
120 MM MALE INSPECTION CAP WITHOUT SEAL - AC00380
View
Standard 4.5m strap tank fastening kit Standard 4.5m strap tank fastening kit 2
Out-of-Stock
Tank accessories

Standard 4.5m strap tank fastening kit

15130
€28.50
Standard 4.5m strap tank fastening kit This mounting kit is suitable for mounting a water tank up to a capacity of 200 litres Universal mounting kit for water or gas tanks, including under-vehicle mounting. This kit contains all the parts needed to mount a tank to your vehicle. The mounting strap is made of steel and housed in a plastic cover that...
View
Expansion plug for holes Ø 24-25 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 24-25 mm

60081
€8.90
Tappo ad espansione per fori Ø 24-25 mm
Set di montaggio Berger Luxus per serbatoio Set di montaggio Berger Luxus per serbatoio 2
5 days of preparation excluding made to order items
Tank accessories

Set di montaggio Berger Luxus per serbatoio

300/075
€28.50
Set of accessories for fixing the water tank Suitable for installation under the floor or in the storage box of all water tanks. Load capacity per tension strap 150 kg! Solid and without deformation. Corrosion Proof: All parts are galvanized, the tension belt is additionally coated with plastic. No risk of expansion due to pressed sheet metal parts.Set SB...
Expansion plug for holes Ø 26-27 mm
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 26-27 mm

60082
€7.90
Tappo ad espansione per fori Ø 26-27 mm
Vent for drinking water tanks 22/24 mm Vent for drinking water tanks 22/24 mm 2
5 days of preparation excluding made to order items
Tank accessories

Vent for drinking water tanks 22/24 mm

300/059
€14.90
22/24 mm vent for potable water tanks, complete with threaded bush with nut and gasket. Drilling diameter approx. 33 mm. Total height of the compass about 90 mm. Hole approximately 22mm diameter. To be installed on the bottom of a gray or clear water tank, in order to be able to discharge.
DIN 96 CAP WITH TWO HOLES DIN 96 CAP WITH TWO HOLES 2
5 days of preparation excluding made to order items
Tank accessories

DIN 96 CAP WITH TWO HOLES

018 TAPP-DIN96
€6.00
DIN 96 CAP WITH TWO HOLES Consisting of a threaded part and a perforated part for connections (hole to be enlarged as needed). Replacement for our article 14870, 14872 showers and tanks. Also to install an immersion pump in a tank and to be able to unscrew the cap to fill it without detaching the connections. Internal thread diameter 96 mm. Height...
Transfer funnel dia 160 mm Transfer funnel dia 160 mm 2
5 days of preparation excluding made to order items
Tank accessories

Transfer funnel dia 160 mm

67030
€6.10
Transfer funnel 160 mm diameter, with removable hose and steel filter.
Tappo per tanica Tappo per tanica 2
5 days of preparation excluding made to order items
Tank accessories

Tappo per tanica

300/084
€4.90
Plug-in cap for canister, with cable entry and pump hose Plug-in cap, not open, with cable passage and tube for the submersible pump. DIN96 Diameter 80 mm

Customers who bought this product also bought:

Expansion plug for holes Ø 33 mm for drinking water
5 days of preparation excluding made to order items
Tank accessories

Expansion plug for holes Ø 33 mm for drinking water

BOC9002
€7.90
Expansion plug for holes Ø 33 mm for drinking water tanks
Kit 12 cylinders 2 keys New System FAP Kit 12 cylinders 2 keys New System FAP 2
5 days of preparation excluding made to order items
FAP New System keys

Kit 12 cylinders 2 keys New System FAP

30117
€34.00
Kit 12 cylinders 2 keys New System FAP same numbering Ideal for making all vehicle locks uniform. Available numbers: from 8001 to 8050 or from 6 XXXX according to stock availability . Characterized by the cylinder with a drag tongue divided into two halves. Recess diameter 17 mm Cylinder diameter 13.5 mm Total cylinder length 27.5 Cylinder length...
FLAP-LOCK MOON FAP DX white lock with New System cylinder... FLAP-LOCK MOON FAP DX white lock with New System cylinder... 2
5 days of preparation excluding made to order items
Serr lockers FAP

FLAP-LOCK MOON FAP DX white lock with New System cylinder and keys

30287.10
€15.90
Serratura FLAP-LOCK MOON FAP DX bianca c/cilindro New System e chiavi Serratura per portelloni con chiusura a paletto standard - vers. Sx. Modello FAP 1109 Cilindri compatibili: New System. Tipologia paletto: Quadro di 8 mm. Fornita di rotore e coppia chiavi. Colore bianco RAL 9010
New System FAP cylinder extraction key New System FAP cylinder extraction key 2
5 days of preparation excluding made to order items
FAP New System keys

New System FAP cylinder extraction key

30112
€10.90
New System FAP cylinder extraction key With the lock open, insert the extraction key into the cylinder to be replaced, pressing it all the way down. In this way the last blade of the cylinder is retracted and it can be removed from the lock seat. If you encounter difficulty in the operation, the cause may be dirt or damage to the seat caused by wear or...
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text